Smal l diameter tubes
Stainless Steel Tube Specialist
Quality Source for Small diameter Tubing
• Seamless Tubing from 1mm Diameter
• Welded & Redrawn Tubing
from 0.235mm diameter
• Hard Drawn / Bright Drawn Annealed
• Coils / Cut-to-length / Random Lengths
T | +44 (0) 1827 305351
F | +44 (0) 1827 63686
E |
www. spimater ial s .co.uk
Redrawn precision
tubes
Tecnofar SpA was founded in 1974 in Delebio, Italy, as
family-run company specialising in manufacturing stainless
steel and nickel alloy tubes. Experimentation and research,
together with the development of new technologies, has
made Tecnofar an advanced company in this field.
The company has two production units, located in Delebio
and Gordona, covering a total surface area of around
10,000m
2
.
Tecnofar produces redrawn precision tubes, both in
bar and coil form, using the TIG welding process. The
company offers a modern, well-equipped department for
tube cutting, and is able to produce completely burr-free
cut pieces measuring just a few millimetres in length.
The company can supply stainless steel tubes ranging from
0.3 to 20mm OD, and from 0.1 to 2mm wall thickness,
for precision tubes, while for welded tubes the maximum
diameter available is 76mm, with wall thickness up to
3.5mm.
Tecnofar uses stainless steels provided and guaranteed
by leading steel mills, and offers products in line with
the strictest production controls. The company’s quality
system achieved international standard ISO 9001:2008,
accredited by Italcert, and is structured in such a way as to
ensure continuous improvement of products and customer
service.
The company has also been certified PED (97/23) EC all.1
par. 4.3, for the welding and heat treatment processes
of product ranges OD 5-77mm and WT 0.35-2.6mm for
austenitic series; and OD 5-77mm and WT 0.56-1.95mm
for ferritic series.
Tecnofar SpA
– Italy
Tecnofar can supply high precision tubing just a few millimetres
in length
114
Tube Products International March 2014
