EoW November 2009

15 / 112

EuroWire – November 2009 13
corporatenews
Corus grants temporary
reprieve at Llanwern
After being mothballed since January 2009, production at
the Corus hot strip mill at Llanwern near Newport, Wales was
re-started in September. The company said that growth in
orders demanded an increase in production, but that this would
not reverse the decision to make 528 job losses at the plant.
Mr Tim Rutter, head of communications for Corus Strip Products
UK, said: “We don’t know how sustainable this slight increase
in demand will be. We will constantly review what capacity is
needed; our first choice is always to use Port Talbot because
of the energy situation and the cost of transporting steel to
Llanwern. We also hope to increase capacity of the Port Talbot
mill to 4 million tonnes per annum by the middle of next year.”
Roughly 850 staff remain at Llanwern, with around
500 working directly in manufacturing. Some of these staff
will be redeployed to work on the hot strip mill. Steel union
Community welcomed the move and said it would be seeking
a meeting with Corus to discuss the long term implications.
Mr Michael Leahy, general secretary of Community, said that
“At face value this is great news for our members in Llanwern
and will bring much needed hope to the workforce. Sadly,
this comes too late to save hundreds of jobs, but we will be
seeking a meeting with Corus to discuss the detail of the
announcement and its longer term implications.”
Corus Group – UK
Website :
A new firm, based in the UK, is believed to be the first
in Europe to recycle tyre wire for smelting. Enviromise
specialises in separating the steel wire from the surrounding
rubber to a standard where it can be resmelted.
Up to 20% of a tyre is usually condemned to landfill because
recycling tyre wire is a difficult and expensive process to
undertake. Enviromise business development manager,
Angus Carnie, said: “Being able to separate the steel is a
huge benefit to the steel industry and tyre re-processors,
as the whole tyre can now be recycled. This means that 300
tonnes of waste will be diverted from landfill every week, so
it is a very green alternative. We have had a huge amount of
interest from people in the industry.”
At the 25,000ft 2 plant the machinery can process seven
tonnes of wire an hour. It strips the rubber from the wire in
a process that effectively granulates the rubber, removing
rubber and rust contamination to produce clean steel. The
rubber waste is then used to produce children’s playground
products, so the plant produces zero waste.
Peter Taylor, secretary general of the UK’s Tyre Recovery
Association, commented: “If it’s a viable process, the plant
will be a very welcome addition to the tyre recycling process.
There are a lot of high value components in a tyre and wire is
one of them, so we’re delighted.”
Enviromise Ltd – UK
Fax: +44 121 544 5734
Website :
Greener wires for tyres