Table of Contents Table of Contents
Previous Page  106 / 1618 Next Page
Information
Show Menu
Previous Page 106 / 1618 Next Page
Page Background

1/88

Cutting Tools

1

Design:

With embedded and individually soldered carbide teeth. The drill also has an

integrated ejector aid for simple removal of the armouring from the drill body. The shank has

a thread for quick changeover between the armouring drill and hammer drill.

Application:

For use with SDS-plus ratio adapter, 100 % suitable for hammer drills. Ideal for

reinforced concrete with the usual building site armouring. The hammer drill hits armouring.

The armouring drill is used and the armouring drilled through. Then the hammer drill is used

again and drilling continues.

Note:

Only cut through armouring with authorisation from a structural engineer.

Order

No.

mm

1266

Drilling depth

mm

Total length

mm

0120

12

97.70

190

230

0140

14

97.70

190

230

0160

16

118.00

190

230

0180

18

126.00

190

230

0200

20

129.00

190

230

0250

25

146.50

190

230

0280

28

150.50

190

230

0300

30

159.00

190

230

(W119)

RebarCutter armouring drill

Application:

For armouring drill RebarCutter (order no. 1266) and Ratio carbide hammer drill

(order no. 1276) in SDS-plus or SDS-max hammer drills.

Order

No.

Mandrel

1267

Length

mm

0010

SDS-plus

37.20

108

0020

SDS-max

37.20

185

(W119)

Adapter for Ratio Quick hammer drills

Design:

High drill bit with sturdy base and ground carbide teeth on all sides, which can be

sharpened. The clamping area is large and therefore ensures quick drill dust removal without

sticking. Drilling residues are also easy to remove. Max. drilling depth 65 mm.

Application:

Ideal for installation of sockets and junction boxes.

Torsion-free drilling

is

guaranteed and sockets are countersunk in one step due to the high and sturdy drill body. The

partially ground teeth prevent burning when drilling in wood. Suitable for a number of materials

such as aluminium, insulation, gas concrete, plasterboard, wood and sandstone. For use on

machines with SDS-plus and hexagon shank.

Order

No.

mm

1275

Area of use

0680

68

33.90

Switch boxes

0820

82

43.60

Junction boxes

(W121)

Multi-purpose keyhole saw Allmat

Application:

Multi-purpose keyhole saw Allmat (order no. 1275).

Order

No.

Mandrel

1275

0050

Hexagonal

10.65

0055

SDS-plus

10.65

(W121)

Mount shank Allmat

Design:

Centre drill in sturdy design for fast and safe drill start on all surfaces.

To suit mount shank (order no. 1275).

Order

No.

mm

1275

Length

mm

0010

8

4.80

100

(W121)

Centre drill Allmat

Adapters/drills/keyhole saws and accessories

106