1145 / 1618
6/125
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Hand Tools
6
The screw claw in practice
Slide claw screw to
the blade until the tip
emerges.
Set screw and fix the
claw.
Continue pushing claw
screw until the slightly
spread arms touch the
screw head.
The arms are spread
apart on surfaces and
thus release the screw
again.
In deep fittings, the
screw claw moves the
blade up.
Design:
Elastomer-plastic, with free-run sleeve for easy guide of
screwdriver. Supplied in SB packaging.
Application:
For holding screws on screwdrivers, long bits and
angle wrenches, round and hexagon blade. The screw claw releases
the screw automatically after the screwing process due to special
geometry, yet screwing in blind holes is still easily possible.
Order
No.
For blades ∅
mm
6877
0015
4.5 -6 (PH/PZ 1 + 2)
4.65
0020
1 x 4.5–6 (PH/PZ 1)/1 x 6.5–8 (PH/PZ 2)
9.25
(W543)
Scre claw
6877
For standard screwdriver.
0015
6877
VDE claw screw set
For screwdrivers with insulated blade.
Set consists of a red and a red/yellow claw screw.
0020
6877 0020
6877 0015
Application:
To magnetise and de-magnetise tools.
Order
No.
Dimensions L x W x H
mm
6382
0006
48 x 48 x 20
7.60
(W543)
Magnetising device
Design:
Made of chrome-vanadium steel, throughout,
with impact cap and wooden handle.
Order
No.
Blade length
mm
6882
6883
Total length
mm
∅
mm
0005
105
4.51
–
195
6
0010
105
–
4.93
195
6
(W542)
(W542)
Awl/reamer
6882
Awl
with round blade.
6883
Reamer,
with square blade.
6883
6882
Claw screws/awl/reamer
1145