1243 / 1618
6/223
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Hand Tools
6
Design:
Sturdy counter support with T-handle and single extraction hook.
Delivery of 22-1 and 22-2 with screwed-in reducer and 22-3 with connection nut
and screwed-in reducer.
22-1
For recessed extractors 21-0 and 21-02,
with
reducer
For recessed extractors 21-1 and 21-5,
without
reducer.
22-2
For recessed extractors 21-3 and 21-5,
with
reducer.
For recessed extractors 21-6 and 21-8,
without
reducer.
22-3
For recessed extractor 21-6 and 21-8,
with
reducer via connecting nut.
For recessed extractor 21-9,
without
reducer via connecting nut.
Application:
For use with an recessed extractor (Order No. 6922). For connecting
to the recessed extractor, the spindle of the support brace is screwed into the
clamping nut of the recessed extractor.
Order
No.
Model
6923
For recessed puller model
0001
22-1
44.30
21-0 – 21-5
0002
22-2
61.50
21-3 – 21-8
0003
22-3
122.00
21-6 – 21-9
(W562)
Counter part for recessed extractor
Design:
Supplied in L-Boxx, with constantly visible instructions on the lid.
Application:
For recessed, external and bearing pulling of ∅ 8-48 mm.
Order
No.
Design
6896
Model Set contents
0005
21-part 662.00
27-A 1 two-armed puller 43-01
1 Extractor single-armed with lateral clamping
device 204-01
1 Ball bearing extractor 69-A1, suitable for bearings:
6004; 6005; 6006; 6201; 6202; 6203
1 Ball bearing extractor 69-A2, suitable for bearings:
6008; 6009; 6204; 6205; 6300; 6301; 6302
1 Ball bearing extractor 69-A3, suitable for bearings:
6010; 6206; 6303; 6304
1 recessed extractor 21-01-E for bearings ∅: 9–12 mm
1 recessed extractor 21-1-E for bearings ∅: 12–16 mm
1 recessed extractor 21-2-E for bearings ∅: 14–19 mm
1 recessed extractor 21-3-E for bearings ∅: 18–23 mm
1 recessed extractor 21-4-E for bearings ∅: 24–34 mm
1 recessed extractor 21-5-E for bearings ∅: 34–48 mm
10 Slide hammers with adapter 22-01–G27-A:
M3; M4; M5; M6; M8; M10; M12
and galvanised: M10; M12; 15–16G
(W562)
Universal extractor set
Design:
Supplied in L-Boxx or metal case, with operating instructions always visible on the lid.
Application:
For extracting ball bearings, bearings, gears, shoulder bearing inner rings, deep
groove ball bearings as well as extracting tight-fitting ball bearings, bearing outer rings and
sleeves.
Order
No.
Design
6926
Model
Set contents
0046
11-part
in L-Boxx
661.00
24-A 6 recessed pullers (12–46 mm) 21-1 to 21-6
2 counter supports 22-1; 22-2
1 removal chuck for groove ball bearing inner rings 23
1 double-armed battery clamp remover 43-1
1 two-armed puller 20-1
0070
14-part
in L-Boxx
970.50
24-B 8 recessed pullers (12–70 mm) 21-1 to 21-8
2 counter supports 22-1; 22-2
1 removal chuck for groove ball bearing inner rings 23
1 double-armed battery clamp remover 43-1
2 two-armed pullers 20-1; 20-2
(W562)
Ball bearing puller and extractor set
Continued on next page
Extractor
1243