1250 / 1618
6/230
Hand Tools
6
Design:
Made of tempered special steel, with hexagonal nut to tighten the hardened
chisel cutter as well as anvil with spanner surface and pressure spindle.
Application:
For splitting inextricably fixed or overly tightened nuts of grades 5; 6; 8
and 10 without damaging the thread. Can also be used in confined areas due to the
double cranking action. The hydraulic system minimizes effort.
Note:
Dull, jagged or broken chisel must be replaced immediately.
Order
No.
Model
6935
For stainless steel
For nut size
0022
56-1
129.00
–
SW 7–22 (M4–M14)
0036
56-2
243.00
–
SW 22–36 (M14–M24)
0046
56-3
355.00
Up to grade 10
SW 27–36 (M18–M24)
(W562)
Nut splitters, hydraulic
6935 0022
6935 0036
6935 0046
Design:
Made of chrome-vanadium steel, annealed, with rolled thread and fine left twist.
The shank is sharpened, with square for actuation with a tap wrench or tool holder.
Application:
For removing broken screws with a right thread. Drill a central hole in the
piece to be removed using the recommended size of spiral drill, insert the screw extractor
and turn evenly (not with a jerk) to the left to loosen the residual piece.
Order
No.
Size
1855
For screws Spiral drill ∅
mm
d1–d2
mm
Square
mm
Total length
mm
0001
1
1.18
M4
1.8
1.4– 3.6 2.7
50
0002
2
1.18
M5–7
3.2
2.1– 4.9 3.8
57
0003
3
1.45
M8–10
4.5
3.1– 6.5 4.9
64
0004
4
1.86
M11–14
6.5
4.8– 8.8 7.0
71
0005
5
2.34
M16–18
8.5
6.2–11.0 9.0
79
0006
6
3.44
M18–24
12.0
9.4–15.0 12.0
85
0007
7
5.55
M24–33
15.3
12.7–19.0 14.5
92
0008
8
8.25
M33–45
20.0
17.5–24.0 18.0
100
(W176)
Screw extractor
Screw extractor set
Design:
Supplied in plastic cassette.
Order
No.
Set contents
1856
For screws
0010
1–5
9.75
M4–18
0005
1–6
12.95
M4–24
(W176)
1856 0010
Puller/screw extractor
1250