1264 / 1618
7/4
Hand Tools
7
Brushes for battery-powered devices
Battery-powered devices have experienced constant improvements
regarding running times and power over the past years. Devices that
do not need a power socket are now indispensable; especially when
working in different places, such as in the building trade or for use by
fire brigades.
Why do I need a special tool?
People out on the road need a tool that covers lots of applications
and, of course, the heavier the tool, the quicker the battery runs
out. In order to optimise mobile use, alongside a high-performance
device you need a tool with a low weight and the best possible
flexibility in application.
Benefits:
• Flexible use
• Low vibration and quiet
• Low weight
• Longer battery life (up to 30 % and more is possible)
• This means fewer charging cycles
Design:
Suitable for all standard battery-powered one-hand angle grinders. Thread M14 x 2.0.
Note:
Observe safety recommendations.
Order
No.
Brush ∅
mm
8805
8806
Effective working width
mm
Max. speed RPM
min
-1
0060
60
12.20
12.85
21
12500
(W702)
(W702)
Cup brushes for battery-powered devices
8805
8806
8805
Brass wire, crimped.
Suitable for surface processing NF metals and soft wood.
8806
With
nylon filaments impregnated with silicon carbide
with hard and pointed
tips and very flexible working surface. No risk of breakage despite high elasticity
and flexibility. This prevents clogging the trim with grinding residue to ensure
constant high quality grinding. Plus the abrasive filaments are resistant against
weak acids and lyes. For descaling, deburring and removal of rust and adhesive
residues, as well as for preparing and cleaning weld seams. Suitable for all metals,
hard and soft wood and ceramics.
Grinding and polishing
tools for battery-powered
devices
You will find more tools for mobile
use in chapter 8:
Cutting disc
Ç
8/13
Diamond cutting disc
Ç
8/17
Rough grinding wheel
Ç
8/7
Abrasive mop discs
Ç
8/45
Polishing ring, Finishing ring
Ç
8/89
m
Design:
Very robust, nylon filaments impregnated with silicon carbide with hard and pointed
tips and very flexible working surface. No risk of breakage despite high elasticity and flexibility.
This prevents clogging the trim with grinding residue to ensure constant high quality grinding.
Plus the abrasive filaments are resistant against weak acids and lyes. Suitable for all standard
battery-powered one-hand angle grinders. Thread M14 x 2.0.
Application:
For descaling, deburring and removal of rust and adhesive residues, as well as for
preparing and cleaning weld seams. Suitable for all metals, hard and soft wood and ceramics.
Note:
Observe safety recommendations.
Order
No.
Brush ∅
mm
8807
Effective working width
mm
Max. speed RPM
min
-1
0100
100
16.65
20
12500
(W702)
Conical brush for battery-powered devices
m
Brushes for battery-powered devices
1264