1271 / 1618
7/11
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Hand Tools
7
Design:
Made of stainless steel, cutting edges made of HSS steel for longer service life, drop
forged and tempered, cutting edges additionally induction hardened (min. 65 HRC), handles in
lacquer finish.
Application:
For straight and continuous cuts as well as figure cuts, in metal sheets and
stainless steel sheets up to 1.0 mm.
Order
No.
Length
mm
7063
Right-hand cutting
7065
Left-hand cutting
Cutting edge length
mm
0280
280
105.50
105.50
34
(W565)
(W565)
Ideal tin snips, HSS
Design:
Made of stainless steel, drop-forged and fully tempered cutter head, cutting edges
additionally induction hardened (min. 59 HRC), with micro-serration. With stable, ergonomically
shaped steel handle, plastic coated and slip guard incl.
Application:
For short, straight cuts as well as figure cuts with small radii, in metal sheets up
to 1.2 mm and stainless steel sheets up to 0.8 mm.
Order
No.
Length
mm
7068
Right-hand cutting
7070
Left-hand cutting
Cutting edge length
mm
0260
260
24.30
24.30
40
(W568)
(W568)
Figure tin snips, with lever transmission
Design:
Stainless steel, drop-forged and fully tempered cutter head, cutting edges additionally
induction hardened (min. 59 HRC), with micro-serration. Handles with ergonomic plastic
coating, slip guards and suspension eye.
Application:
For straight and continuous cuts as well as figure cuts with small radii in metal
sheets up to 1.2 mm and stainless steel sheets up to 0.8 mm.
Order
No.
Length
mm
7082
Right-hand cutting
7084
Left-hand cutting
Cutting edge length
mm
0260
260
24.40
24.40
32
(W568)
(W568)
Ideal tin snips, with lever transmission
Design:
Stainless steel, cutting edges made of HSS steel for longer service life, drop forged
and tempered, cutting edges additionally induction hardened (min. 65 HRC). Handles with
ergonomic multi-component plastic handles, slip guards and suspension eye.
Application:
For straight and continuous cuts as well as figure cuts, in metal sheets and
stainless steel sheets up to 1.2 mm.
Order
No.
Length
mm
7067
Right-hand cutting
7069
Left-hand cutting
Cutting edge length
mm
0260
260
116.50
116.50
33
(W565)
(W565)
Ideal tin snips, HSS
Design: Particularly robust,
stainless steel cutter head, drop-forged and fully tempered,
cutting edges induction hardened (min. 59 HRC), with micro-serration. Handles in lacquer
finish.
Application:
For straight and continuous cuts as well as figure cuts with small radii in metal
sheets up to 1.5 mm and stainless steel sheets up to 1.0 mm.
Order
No.
Length
mm
7077
Right-hand cutting
7079
Left-hand cutting
Cutting edge length
mm
0240
240
33.70
33.70
24
(W568)
(W568)
Ideal tin snips, with lever transmission
HSS
min.65HRC
HSS
min.65HRC
INOX
min.59HRC
INOX
min.59HRC
INOX
min.59HRC
Tin snips
1271