1293 / 1618
7/33
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Hand Tools
7
Design
Blade hardened, specially ground and interchangeable. Broad pipe contact surface
for a precise burr-free cut.
Application: For the precision one-handed cut,
for quick and easy separation of plastic
and multi-layer pipe in one cut.
Order
No.
For pipe ∅
7201
0090
0–1.1/4" (0–26 mm)
31.40
0111
0–1.5/8" (0–42 mm)
48.60
0131
0–3" (0–75 mm)
249.90
(W622,W001)
Plastic pipe shears ROLLER Picco
7201 0090
7201 0111
7201 0131
7201
Blade with PTFE coating. Body made of especially lightweight,
robust magnesium.
0090
7201
Body made of particularly robust aluminium, with special ratchet
and fast rewind.
0111
7201
Body made of particularly robust steel, handles with plastic sleeves,
with special ratchet.
0131
Design:
Blade with pointed cutting edge for low-effort penetration into the material. With
opening spring and one-hand locking lever.
Application:
For precise, single-handed cutting of tubes, including with textile reinforcement
e.g. aramid fibres
Order
No.
For pipe ∅
mm
7138
722A
0022
0–22
21.60
–
1022
Spare blade for 0–22 mm
10.65
–
0028
0–28
31.40
–
1028
Spare blade for 0–28 mm
11.95
–
0185
0–25
–
36.20
1185
Spare blade for 0–25 mm
–
12.40
(W574)
(W525)
Tube and pipe shears
7138 0022
7138 0028
722A
7138
Die-cast magnesium body, blade PTFE coated.
0022
7138
Die-cast magnesium body, blade PTFE coated. The joint is made of a steel
mounted axle with needle bearing. Handles with impact-absorbing soft inserts.
Also cuts soft plastic pipes e.g. PEX, PE, PB, etc. as well as thin-walled plastic
armoured pipes.
0028
722A
Body made of glass fibre reinforced plastic, blade made of special tool steel,
oil-hardened.
Also cuts soft plastic pipes e.g. PEX, PE, PB, etc. as well as thin-walled plastic
armoured pipes.
0185
Design:
Blade made from stainless steel with optimum cutting geometry and PTFE coating, can
be replaced quickly without tools. To protect the blade and reduce the risk of injury, it is housed
in casing. Body made of magnesium die casting with one-handed quick retraction of blades
and ergonomic soft plastic inlays.
Application:
For precise one-handed cutting, for the quick, low-force separation of plastic and
composite pipes with tooth-guided feed.
Order
No.
For pipe ∅
7217
0110
0–1.5/8" (0–42 mm)
41.90
0120
Stainless steel spare blade 0–1.5/8" (0–42 mm)
17.15
(W574)
Plastic pipe shears
Order
No.
For pipe ∅
7201
0100
Spare blade 0–1.1/4" (0–26 mm)
15.90
0120
Spare blade 0–1.5/8" (0–42 mm)
30.00
0141
Spare blade 0–3" (0–75 mm)
100.00
(W623)
m
Tube/plastic pipe shears
1293