1379 / 1618
8/31
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Abrasives
8
Trizact™
Cubitron™
Cubitron™ II
The abrasive grain consists of a precisely arranged, three-dimensional structure of tiny mineral
particles. New abrasive particle layers are exposed continuously. Once the tape is half used,
about 85% of the abrasive particles are still available.
This produces a smooth, reproducible surface.
Trizact™ abrasives are therefore perfectly suited to finishing and, compared to conventional
abrasives, have a much longer life and are more economical.
Products with Trizact™ abrasive grain
:
Abrasive sleeves for burnishing machines
Ç
8/65
During the grinding process, small corners of the ceramic sintered grain break off. The resulting
micro-breaks in the grain produce sharp edges. This process repeats itself during the entire
grinding process.
This self-sharpening effect increases its life span considerably. Even with high temperatures
and strain generated during the grinding process, the Cubitron™ microstructure retains its
hardness and cutting action. It is therefore ideal for grinding stainless steel, titanium and
heat-sensitive nickel alloys.
Products with Cubitron™-abrasive grain:
Hookit™ Velcro-grinding disks
Ç
8/36
ROLOC™ grinding disks from
Ç
8/41
Bristle discs page
Ç
8/43 and
Ç
8/54
Abrasive sleeves for burnishing machines
Ç
8/65
The individual grains of ceramic Cubitron ™ II abrasives are precisely shaped, uniform in size
and arranged at right angles in the form of small triangles. Naturally Cubitron™ II has the self-
sharpening effect of Cubitron™.
Cubitron
™
II-abrasive grain
Conventional ceramic grain
Different in size and shape as
well as unevenly distributed. The
result is the abrasive's shorter life
span as well as stress fractures
and discolouration of the
material:
Precisely shaped, uniform
grinding grains, evenly
distributed and symmetrically
aligned. The result is maximum
removal rate, a perfect surface
finish, a quicker, cooler grind as
well as less material distortion:
The higher deburring of Cubitron™ II-abrasives benefit all metal-working operations such as steel construction, container construction, welding
companies, foundries and forges using angle grinders and belt sanders for more removal.
Typical applications are:
• Weld preparation/deburring, cast machining
Quicker deburring and a finish, which often needs no further
machining and shortens processing time.
• Chamfering before welding
Quicker grinding processes compared to conventional
grinding products and a longer life span.
• General removal work
Universal on steel, tool steel and non-ferrous metals:
All removal work is faster, easier and provides a smoother finish.
Your advantages:
• Greater, smoother removal
• Up to 40% time saving potential
• 2 to 7 times longer life (depending on the application process)
• Shorter tooling time due to savings on disk changes
• Less pressure means greater comfort for the user
• Less dust and heat development
Products with Cubitron™-abrasive grain:
Fibre grinding disks for steel and stainless steel
Ç
8/32
ROLOC™ grinding disks
Ç
8/42
Abrasive flap wheels
Ç
8/51
Abrasive sleeves for machine burnishing machines
Ç
8/65
Special abrasive by 3M
1379