1475 / 1618
9/35
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Soldering/Welding/
Workshop Equipment
9
Design:
According to DIN EN 29454-1 3.1.1.C.
Application:
For soft soldering tin plate and leaded panels and for tinning copper and brass.
Not suitable for soldering in electronics and electrical engineering.
Note:
Contains zinc chloride, irritating.
Order
No.
Design
9183
0005
50 g can
2.34
0010
100 g can
3.18
(W939)
Soldering grease
Design:
According to DIN EN 29454-1 3.1.2.C. Applicable with fittings solder
(Order No. 9173 0025).
Application:
For soft soldering copper pipe installation and for general soldering.
Note:
Contains zinc chloride, irritating.
Order
No.
Design
9186
0007
70 ml tube
4.20
(W939)
Soldering grease
Design:
Supplied in a can.
Application:
For cleaning soldering tips.
Order
No.
Dimensions
mm
9195
0020
100 x 45 x 25
7.85
(W939)
Salmiak solder stone
Design:
Flat in tin plate, natural bristles, width 9 mm.
Application:
Ideal for applying solder flux, welding paste, hydrochloric acids,
drilling and grinding oil, soapy water and lots more.
Order
No.
Width
mm
9192
Content
Piece
0011
9
0.66
1
0050
9
9.25
10
(W939)
Soldering fluid brush
Design:
Without silver, according to DIN EN 1044-CP203 L-CuP6, melting range 710 °C,
working temperature 730 °C. 93.8 % Cu, 6.2 % P, DVGW GW2 4.3.2. Delivered in a 1 kg carton.
Application:
For copper, cold and warm water installations and gas installations. Only with
soldering flux in conjunction with brass or red brass.
Order
No.
Dimensions
mm
9197
0005
2 x 500
51.30
(W939)
Brazing solder (copper-phosphorus solder)
Soldering flux
Order
No.
Design
9189
0005
50 ml bottle
3.81
0500
500 ml bottle
15.25
(W939)
Design:
According to DIN EN 29454-1 3.1.1.A.
Application:
For soft-soldering of iron, steel, copper, brass and for general soldering work.
Note:
Contains zinc chloride, irritating.
Soldering accessories
1475