1483 / 1618
9/43
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Soldering/Welding/
Workshop Equipment
9
Design:
Made of high-quality die-cast
aluminium, with closed shell, which adds
stability and offers protection from dirt. The
tooth segment transmission with favourable
lever arm arrangement reduces the force
required and dampens the tear-off effect.
Repeated re-engagement very easy, even
on workpiece. The hinge pin is mounted to
prevent turning and features internal axial
securing. In addition, the hand riveter features
a plug-in and pivotable riveting mandrel
container as well as handy handles.
Application:
For all materials from ∅ 3.0 to
6.4 mm, except PolyGrip
®
and G-Bulb
®
blind
rivets with ∅ 6.4 mm made of stainless steel.
Scope of delivery:
Hand riveter HN 2,
5 nosepieces 16/29, 16/32, 16/36,
16/40, 16/45.
Nosepiece attachment:
Rivet ∅ Rivet material
Nosepiece
3 and 3.2 Alu, Cu, steel, stainless
16/24
steel, Stinox, Alu/Alu,
PG-Alu, PG-steel
4
Aluminium, Cu
16/24
4
steel, CAP-Alu, CAP-Cu,
16/27
Alu/Alu, PG-Alu
4
Stainless steel, Stinox,
16/29
PG-steel
4.8
CAP-aluminium, CAP-Cu 16/29
4.8 and 5 Aluminium, PG-aluminium 16/29
4.8 and 5 Steel, aluminium/aluminium16/32
4.8 and 5 Stainless steel, Stinox,
16/36
PG-steel
6
Aluminium
16/36
6
Steel
16/40
6.4
Aluminium, PG-aluminium 16/40
6.4
Steel, aluminium/aluminium16/45
Order
No.
Equipment lift
mm
9309
Length
mm
Weight
g
0005
10
202.00
570
1850
(W960)
Rivet gun HN 2
Design:
Made of die-cast aluminium with
forged pliers jaws made of high-quality steel.
The required
hand strength
is reduced by
40%
after repeated actuation.
The hinge pin
is mounted to prevent turning. With plug-on
mandrel-collecting vessel, a spring reset for
automatic mandrel ejection and an opening
spring.
Application:
For aluminium up to ∅ 5 mm,
steel and stainless steel up to ∅ 4 mm.
Scope of delivery:
Hand riveter Flipper
®
,
1 assembly key and 3 mouthpieces
10/18, 10/24, 10/29.
Nosepiece attachment:
Rivet ∅ Rivet material
Nosepiece
2.4
Aluminium
10/18
3.2
CAP-aluminium, CAP-Cu 10/18
3 and 3.2 Alu, Cu, steel, stainless
10/24
steel, Stinox, Alu/Alu,
PG-Alu, PG-steel
4
Aluminium, Cu
10/24
4
steel, CAP-Alu, CAP-Cu,
10/27
Alu/Alu, PG-Alu
4
Stainless steel, Stinox,
10/29
PG-steel
4.8
CAP-aluminium, CAP-Cu 10/29
4.8 and 5 Aluminium, PG-aluminium 10/32
Order
No.
Equipment lift
mm
9306
Length
mm
Weight
g
0006
16.2
71.40
212
750
(W960)
Hand riveter Flipper
®
Order
No.
Design
9302
9303
Set contents
0005
136 pcs 59.40
–
1 hand riveter NTS (Order No. 9305)
40 alu/steel blind rivets 4 x 6
per 30 alu/steel blind rivet 4 x 8, 4 x 12
33 washers 4.1 mm
1 special drill
1 installation wrench 10 mm
0010
941 pcs
–
130.00
1 hand riveter NTX (Order No. 9300)
per 100 alu/steel blind rivets 3 x 5; 3 x 7
80 alu/steel blind rivets 3 x 8; 3 x 10; 4 x 5; 4 x 6
per 70 alu/steel blind rivets 3 x 12; 4 x 8
per 60 alu/steel blind rivets 4 x 10; 4 x 12
90 copper/steel blind rivets 3 x 6
70 copper/steel blind rivets 4 x 6
(W960)
(W960)
Blind rivet set
9302
9303
9302
Delivery in plastic case.
9303
Supplied in sheet steel case.
Riveter/blind rivet tools
1483