151 / 1618
1/133
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Cutting Tools
1
Design:
Set consisting of:
1 robust, ergonomically shaped softgrip handle EL SG 3000 GT
with comfortable finger hollow and blade magazine
(order no. 6719 0020)
1 HSS crank piercing deburrer BO 1000 ∅ 3.2 mm
(order no. 6719 0300)
Application:
Due to the twin mount, all B-blades with a ∅ 2.6 mm
and all E-blades with a ∅ 3.2 mm shank can be used. Inner piercings
and slots for o-rings as well as securing rings can easily be deburred
by connecting with the crank piercing deburrer.
Order
No.
6711
0010
21.80
(W554)
Softgrip piercing deburrer set SG 1200
Design:
Set consisting of:
1 sturdy plastic handle with hand protection
2 round HSS cutting discs N 80
(order no. 6719 0600)
Application:
The blade runs along the full length on both sides. This
allows sheets and bars up to 12 mm in thickness to be deburred on
both sides at the same time. For stainless steel sheets corresponding
cutting discs N 80 M 42 (Order No. 6719 0610) are available.
Order
No.
6712
0010
23.80
(W554)
Double sheet deburrer tool set DB 2000
Design:
Keramicut deburrers are the perfect tool for deburring
problems with plastic and light metal workpieces. This results in the
following advantages:
1. Due to the extra hard ceramic blade, plastics and other soft
materials are easily deburred.
2. Due to the wear-resistant and sturdy ceramic blade, the tool has a
long service life.
3. Damage-free work without rejects is possible due to the spherical
blade (r = 250 mm).
4. There is no risk of injury due to the blunt 90° blade angle.
Application:
For on-the-spot removal of materials on plastic and light
metal workpieces. Position the blade on the area for deburring at an
angle of 60–80° and draw over the workpiece in a continual motion.
Do not apply excessive pressure.
Order
No.
6713
6700
0050
42.70
–
0010
–
30.20
(W554)
(W554)
Keramicut deburrer
6713
Robust, ergonomically shaped softgrip handle with
comfortable finger hollow and fixed ceramic blade.
6700
Oval plastic grip with replaceable ceramic blade CR 2200.
Ceramic blade CR 2200
order no.
(6719 0810) straight design
(6719 0820) sickle-shaped design
6700
6713
for Ø 2,6 mm Shaft
for Ø 3,2 mm Shaft
Deburring tools
151