440 / 1618
2/186
Cutting Tools
2
Indexable Insert Through Coolant Drill x 3D
Order No.
Dimensions
Milling inserts
Catalogue page
2999 5600 – 2999 5785
∅ 15–40 mm XPET 05/06/07/09/11/12...
SCET 05/06/07/09/12
2/187
C
Using indexing insert drills (short bore) achieves a multiplicity of
productivity and cost savings with HSS drills. The optimum
choice of carbide together with the right geometry and
feed rate guarantees controlled chip formation.
Requirements for good bore results as follows:
• Stable clamping
• Short overhangs, compact drill chuck
• Correct tool positioning for machine spindle
• Use of cooling oil or compressed air at sufficient pressure (chip
removal)
• Warning
With drill withdrawal a disc drops.
Risk of accident with rotating workpieces.
Please take precautions!
Application
• Universally applicable WP drill for use on lathes,
drills and milling centres.
• Can be used as a stationary and rotating tool, both horizontally
and vertically
• Cylindrical shank with face according to ISO 9766
• Bore depths up to 3 x D should not be exceeded
• With concave/oblique surfaces the feed rate
should be reduced by ca. 30–50 %.
Advantages
• Drilling with indexable inserts - economic production of bores or
through-holes and blind holes
• Very good machining performance with high cutting speeds
and feed rates
• No running off of the bore axle
• Direction precise drilling
Carbide
Varieties
Tensile strength
Rm N/mm
2
Cutting
speed
feed
∅ D mm
15–18.5
∅ D mm
19–22
∅ D mm
22.5–27
∅ D mm
28–34
∅ D mm
35–40
P
Steel
< 450
Vc m/min.
f mm/rev.
250–300
0.05
250–300
0.06
250–300
0.07
250–300
0.08
250–300
0.09
400– 700
Vc m/min.
f mm/rev.
230–270
0.10
231–270
0.12
232–270
0.14
233–270
0.16
234–270
0.18
550– 900
Vc m/min.
f mm/rev.
180–230
0.11
180–230
0.15
180–230
0.18
180–230
0.20
180–230
0.22
900–1200
Vc m/min.
f mm/rev.
100–180
0.10
100–180
0.15
100–180
0.18
100–180
0.20
100–180
0.22
M
Stainless
Vc m/min.
f mm/rev.
120–200
0.07
120–200
0.09
120–200
0.11
120–200
0.12
120–200
0.13
K
Cast
Vc m/min.
f mm/rev.
150–240
0.15
150–240
0.16
150–240
0.18
150–240
0.20
150–240
0.23
N
Non-ferrous
metals
Vc m/min.
f mm/rev.
–
–
–
–
–
–
–
–
–
–
S
Super alloy
Vc m/min.
f mm/rev.
80–120
0.07
80–120
0.09
80–120
0.10
80–120
0.11
80–120
0.12
H
Hard
Vc m/min.
f mm/rev.
–
–
–
–
–
–
–
–
–
–
Notes on using Indexable Insert Drills
Recommended cutting data for indexable drills
Indexable Insert Drill
440