Table of Contents Table of Contents
Previous Page  448 / 1618 Next Page
Information
Show Menu
Previous Page 448 / 1618 Next Page
Page Background

2/194

Cutting Tools

2

Wear resistance

Toughness

P M K N S H

01

Finishing and fine-spindles at high cutting speeds,

best machining results, no vibrations

10

Drilling and copying at high cutting speeds,

good machining results, with small to medium

chip cross-cutting

20

Drilling and copying at medium cutting speeds,

for medium to slightly adverse chipping conditions

30

Turning and facing at medium cutting speeds,

and adverse chip conditions (break in cutting)

40

Turning, grooving and parting at low to medium

cutting speeds and very adverse working

conditions (break in cutting)

50

Turning and parting at very low cutting speeds,

extremely adverse working conditions (severe breaks in cutting)

Carbide, coated

PK 9015 AL

2

0

3

CVD/PVD multi-layer coating, main application area is in groups P and K,

also possible in M group, for preparation and roughing work, continuous,

slight interrupted cut, high cutting speeds

PMK 9030 TiCN

CVD coating, main application area is in groups P, M and K, S group also possible,

for preparation and roughing work, continuous, and interrupted cut, medium to high cutting speeds

PMK 9040 TiCN

CVD coating, main application area is in groups P, M and K, S group also possible,

for roughing work, adverse conditions, severe interrupted cut, low to medium cutting speeds

KNH 9010 TiCN

CVD coating, universal use for finishing in all groups, for operations with high

thermal load, low to medium depth of cut, high cutting speeds

in stable conditions

U

9035 TiCN

CVD coating, universal use in all groups, high wear resistance,

adverse conditions, medium cutting speeds

VA 9040 TiCN

CVD coating, main application area in groups M and P, S also possible.

For finishing in medium processing of VA steels, standard interrupted cut,

medium cutting speeds.

Medium processing VA geometry for processing stainless steel. lightweight cutting. Cuts easily

Also 1. option with very tough steels.

Carbide, uncoated

N

9020

Ultra-fine grain uncoated, main application area group N, fine and finest processing of

groups M and S, in stable conditions, low to medium depth of cut, highly polished

to prevent edge build-up

Cutting Conditions

448