738 / 1618
4/18
Measuring
Equipment
4
Design:
Made of stainless steel, hardened, measuring faces precision ground, with locking
screw, digit height of LCD display 8.5 mm for 300 mm and 12.5 mm over 500 mm measuring
range, inductive measurement system, with data output variable RS 232, USB and Digimatic
(DATA Variable). Supplied with battery CR 2032, 3 V, in a wooden case.
Functions:
On and automatic off switch, mm/inch switching, automatic switching by means of
slider movement, key lock set for zero position, no re-zeroing after switching (absolute system),
reset (zeroing) possible at each position, ± pre-set function (measurement value presetting).
Application:
For diverse measuring tasks, quickly retrofittable to the appropriate measurement,
suitable for all measuring inserts with thread M2.5.
Note:
Supplied without measuring inserts and without adjustment measurement.
Interchangeable steel measuring insert (Order No. 4236,
Ç
4/49).
Interchangeable carbide measuring insert (Order No. 4237,
Ç
4/49).
Extension piece for measuring insert (Order No. 4238,
Ç
4/50).
Replacement battery (Order No. 4026 2032,
Ç
4/13).
Data cable USB (Order No. 4025 0003,
Ç
4/13).
Data cable Digimatic (Order No. 4025 0004,
Ç
4/13).
Data cable RS 232 available on request.
Order
No.
Measurement range
mm
4055
Reading
Jaw length
mm
Jaw width
mm
0403
300
593.00
0.01 mm (0.0005 inch)
90
12
0405
500
777.50
0.01 mm (0.0005 inch)
100
16
(W404)
Digital universal caliper
Design:
Made of stainless steel, with locking screw, digit height of LCD display 12 mm,
with data output Opto RS 232. Supplied with battery CR 2032, 3 V, in plastic case,
over measuring range 1000 mm in transport packaging.
Functions:
On and off switch, mm/inch switching, key lock set for zero position, re-zeroing
after switching deleted (absolute system), reset (zeroing) possible at each position,
hold function (measurement memory).
Application:
For inside and outside measurements.
Note:
Replacement battery: (Order No. 4026 2032,
Ç
4/13).
Order
No.
Measurement range
mm
4054
Reading
Jaw length
mm
Hole dimension
mm
0300
300
205.00
0.01 mm (0.0005 inch)
150
20
0500
500
225.50
0.01 mm (0.0005 inch)
150
20
0800
800
400.00
0.01 mm (0.0005 inch)
150
20
1000
1000
544.00
0.01 mm (0.0005 inch)
150
20
1500
1500*
1231.00
0.01 mm (0.0005 inch)
200
20
2000
2000*
1642.00
0.01 mm (0.0005 inch)
200
20
(W400)
Digital workshop calipers without tips, with fine adjustment
* Measuring rod made of steel.
For outside
measurements
For inside
measurements
Design:
Made of stainless steel, hardened, measuring faces precision ground, with locking
screw, digit height of LCD display 8.5 mm for 300 mm and 12.5 mm over 500 mm
measuring range, inductive measurement system, with data output variable RS 232, USB
and Digimatic (DATA Variable). Supplied with battery CR 2032, 3 V, in a wooden case.
Functions:
On and automatic off switch, mm/inch switching, automatic switching by
means of slider movement, key lock set for zero position, no re-zeroing after switching
(absolute system), reset (zeroing) possible at each position, ± pre-set function
(measurement value presetting).
Application:
For inside and outside measurements.
Note:
Replacement battery: (Order No. 4026 2032,
Ç
4/13).
Data cable USB (Order No. 4025 0003,
Ç
4/13).
Data cable Digimatic (Order No. 4025 0004,
Ç
4/13).
Data cable RS 232 available on request.
Order
No.
Measurement range
mm
4056
Reading
Jaw length
mm
Hole dimension
mm
0300
300
367.00
0.01 mm (0.0005 inch)
90
10
0500
500
538.00
0.01 mm (0.0005 inch)
125
20
0800
800
878.50
0.01 mm (0.0005 inch)
150
20
1000
1000
1085.00
0.01 mm (0.0005 inch)
150
20
1500
1500*
2613.00
0.01 mm (0.0005 inch)
200
30
2000
2000*
3165.00
0.01 mm (0.0005 inch)
200
30
(W404)
Digital workshop calipers without tips
* Without test certificate.
Factory
standard
INOX
IP 65
Absolute
function
RS232
USB
Digimatic
Factory
standard
INOX
Absolute
function
opto
RS232
DIN
862
INOX
Absolute
function
Certificate
RS232
USB
Digimatic
Digital workshop calipers
738