791 / 1618
4/71
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Measuring
Equipment
4
Design:
Made of high-quality, specially alloyed and unstressed special
steel of high stability and good adhesive properties. The hardness
of the gauge blocks is 800 HV (64 HRC), making them highly stable
and exceptionally wear resistant. Each gauge block is marked with an
individual ID number. Supplied in a wooden box.
Tolerance class 1:
Most often-used standard in the measurement room
for the inspection of gauges and for setting measuring instruments.
For lengths
0.5 to 10.0 mm, the height is 30 mm and the depth 9 mm.
For 10.0 to 1000.0 mm, the height is 35 mm and the depth 9 mm.
Application:
For verification in acc. with VDI/VDE/DGQ Z 2618,
Sheet 8, of calipers.
Order
No.
Number in set
4126
Nominal dimension
mm
0003
3
171.50
30.0/41.3/131.4
(W436)
Gauge block test set for caliper
DIN
EN ISO
3650
Design:
Flat glass plate for checking evenness and slip test on
high-precision, even surfaces acc. to the interference method.
Supplied in a wooden box.
Order
No.
∅
mm
4130
Thickness
mm
Evenness
µm
1045
45
161.00
15
0.1
(W436)
Optical flat diameter
Design:
Made of gauge steel, hardened, aged several times.
Application:
As setting gauge for displaying measuring devices, for
the examination of axle distances, cones and other workpieces in
connection with gauge blocks, for the determination of the flange
diameter of threads or partial circle diameters of toothing.
Order
No.
Number
4390
Tol. 0
Measurement
range
Graduation
mm
Tolerance
mm
0010
41 1870.00◊
0.1–0.5
0.01 0.0005
(W489)
Order
No.
Number
4390
Tol. 1
Measurement
range
Graduation
mm
Tolerance
mm
0015
41 1305.00◊
0.1–0.5
0.01 0.0010
0025
91 1855.00◊
0.1–1.0
0.01 0.0010
(W489)
Order
No.
Number
4390
Tol. 2
Measurement
range
Graduation
mm
Tolerance
mm
0020
41 945.00◊
0.1– 0.5
0.01 0.0015
0030
91 1115.00◊
1.0–10.0
0.1
0.0015
(W489)
Calibration pin set
4390
Tolerance class 0
Lapped
0010
4390
Tolerance class 1
Lapped
0015 +
0025
4390
Tolerance class 2
Ground
0020 +
0030
Design:
Made of zirconium oxide ceramic, extremely wear-resistant
and corrosion-free. Each gauge block is marked with an individual ID
No.
Supplied in a wooden box.
Tolerance class 1:
Most often-used standard in the measurement
room for the inspection of gauges and for setting measuring
instruments.
Order
No.
Number
in set
4374
Dimensions
in mm
Graduation
mm
Number
1032
32 1017.00
1.005
1.01– 1.09
1.10– 1.90
1.00– 9.00
10.00–30.00
50.00
–
0.01
0.1
1.0
10.0
–
1
9
9
9
3
1
(W436)
Order
No.
Number
in set
4374
Dimensions
in mm
Graduation
mm
Number
1047
47 1414.00
1.005
1.01 – 1.20
1.30 – 1.90
1.00 – 9.00
10.00 –100.00
–
0.01
0.1
1.0
10.0
1
20
7
9
10
(W436)
Parallel gauge block set, ceramic
DIN
EN ISO
3650
Certificate
m
Parallel gauge block sets
791