802 / 1618
4/82
Measuring
Equipment
4
Design:
Made of aluminium, anodised, deep black print, sealed against scratches,
with tables on the front and back.
Application:
For direct reading of standard bore holes H6 to H13 acc. DIN 7154
from 1–160 mm ∅ and standard shafts h5 to h12 acc. to DIN 7155 from 1–160 mm ∅.
Order
No.
Dimensions
mm
4480
0001
280 x 80
22.50
(W447)
ISO tolerance slide
Execution:
Made of aluminium, anodised, deep-black print, sealed against scratches, with
tables on front and back side for metric ISO thread (DIN 13), Withworth thread (DIN 11),
Withworth pipe thread (DIN 259).
Application:
For the direct reading of all fundamental theoretical thread dimensions as well
as wedge width, wedge height and shaft and hub keyway depth for 10–500 mm shaft ∅.
Order
No.
Dimensions
mm
4481
0001
260 x 50
17.95
(W447)
DIN thread slide
Order
No.
Design
4482
Dimensions
mm
0001
Tolerator
82.30
60 x 30 x 110
0002
Filetor
82.30
60 x 30 x 110
0003
Convertor
82.30
60 x 30 x 110
(W447)
Display device
Tolerator
Filetor
Convertor
4482
ISO tolerance key
Tolerator.
For reading all tolerance values.
0001
4482
ISO thread indicator
Filetor.
For reading all determinations of a thread.
0002
4482
Measurement convertor
Convertor.
For converting mm to inches and vice versa.
0003
Application:
For inspecting intermediate spaces, contact distances, etc.
Order
No.
Number
of blades
4483
4485
4487
Measurement range
mm
Blade length
mm
0008
8
1.99
–
–
0.05-0.5 to 0.3 mm by 0.05 mm, above this increasing by 0.1 mm 100
0013
13
2.50
–
–
0.05–1.00 to 0.3 mm by 0.5 mm, above this increasing by 0.1 mm 100
0013
13
–
–
13.60
0.05-1.00 to 0.3 mm by 0.05 mm, above this increasing by 0.1 mm 300
0020
20
4.18
17.55
–
0.05-1.00 mm, increasing by 0.05 mm
100
0020
20
–
–
20.20
0.05-1.00 mm, increasing by 0.05 mm
300
0021
21
7.60
–
–
0.05-2.00 to 0.1 mm by 0.05 mm, above this increasing by 0.1 mm 100
(W447)
(W447)
(W447)
Feeler gauge
4483
Sensor gauge.
Blades made of hardened spring steel, individually labelled with
the size, conically tapering in high-gloss nickel-plated shell, with locking nut.
4485
Sensor gauge, antimagnetic
Blades made of brass, individually labelled with
the size, conically tapering, with locking nut.
4487
Piston clearance gauge.
Blades made of spring steel, individually labelled with
the size, conically tapering, with locking nut.
4487
4485
4483
Small gauges/thickness gauges
802