848 / 1618
4/128
Measuring
Equipment
4
Design:
Rebound module is jerked by a spring against the test object. The speed reduction
is measured and converted into Leeb hardness values. Tests at any angle (360°) due to
automatic compensation. Mini statistics function displays the measured value, average value,
the difference between maximum and minimum value, date and time. Measuring value display:
Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa).
Automatic unit conversion, so that measurement result is automatically re-evaluated in all the
cited hardness units.
Functions:
Accuracy: 1 % at 800 HLD (± 6 HLD)
Thinnest measurable layer: 8 mm
minimum radius of curvature of the test object (concave/convex : 50 mm
Scope of delivery:
Impact device (type D), infrared printer, hardness reference block, AC
adapter and 3 micro batteries AAA/LR03, in plastic case.
Note:
Replacement battery: (Order No. 9041 0023,
Ç
9/12).
Order
No.
Measurement range
yield strength
4941
Readability
(d) HL
Internal data memory
1000
375–2639
1231.00
1
9
(W498)
Leeb hardness test device HMM
Order
No.
Design
4941
Application
1010
Rebound sensor
507.00
Short sensor for narrow and flat
measurement openings
1015
Attachment ring
331.00
For secure positioning
1020
Impact body
119.00
–
(W498)
Accessories for Leeb hardness test device
4941 1010
4941 1015
4941 1020
Design:
For reproducible hardness testing with base plate of glass. High measurement accuracy
due to increased hardness of the base plate.
Mechanical design allows precise measurement movements. Levelling device for precise levelling
of the base plate. Levelling test bench for inhomogeneous test objects.
Application:
Suitable for Shore hardness testing of plastics, leather, etc. The SAUTER HB
hardness tester is mounted in a hanging position. The test object is placed on the round testing
table right under the probe tip. By depressing the lever, the probe tip is pressed in a defined
manner into the test object.
Note:
The accuracy of the measurement result with this test is about 25% higher than for a hand
measurement. Supplied without Shore-Duometer.
Order
No.
Length of stroke
mm
4941
Measuring face ∅
mm
0110
15
310.50
75
(W498)
Lever test stand for Shore-Duometer
Design:
With drag indicator, max. mode captures the peak value, point mode shows the
stable measured value. Supplied in wooden box.
Application:
Measuring the Shore penetration depth: plastics, resin, Formica, epoxy, acrylic
etc. Recommended especially for internal comparison measurements, where standard
calibration, e.g. according to DIN 53505 is not possible.
Order
No.
Measurement range
4941
Reading
Hardness
0100
100 HD
145.00
1.0 HD
Shore D
(W498)
Hardness tester Shore-Duometer
Hardness test device
848