5/52
Hand Tools
5
Design:
Made of chromium-vanadium high-performance steel, hardened and tempered in
oil.
Polished head.
Precise, easy-action screw joint with internal opening spring and safety
catch. With two extrusions for end caps on Bowden sleeves and end sleeves for control
cables. The special blade shape prevents the wire rope from splaying. Handles covered
with non-slip plastic.
Application:
Suitable for single- and multi-wire copper and aluminium cables, wire rope,
medium-hard wire and piano wire.
Order
No.
Cutting values
wire rope ∅
mm
5421
Cutting values
copper and
aluminium ∅
mm
Cutting values
copper and
aluminium
mm
2
Cutting values
∅ piano wire
mm
Length
mm
0190
5
32.90
7
10
2.5
190
(W525)
Wire rope shears
Pressing the
end cap to the
pull rope.
Pressing the
end cap onto the
Bowden shell.
Design:
Blade head made of special grade tool steel (interchangeable), hardened and tempered
in oil.
Polished head.
Arms made of high-strength aluminium and optimum lever transmission,
angular cutting blades allow cutting through single wire ropes. Plastic-covered handles.
Application:
For copper and aluminium cables, wire cables and round steel,
suitable also for cutting overhead cables with integral straining wires.
Order
No.
Cutting values
wire rope ∅
mm
5410
Cutting values
round steel ∅
mm
Cutting values
copper and aluminium
mm
2
Length
mm
0445
10
194.50
7
95
445
0600
14
241.50
9
150
600
(W525)
Wire rope and cable cutters
Design:
Made of special grade, special tool steel; hardened in oil, black atramentised.
Polished head.
Blades additionally inductive-hardened, cuts smoothly and cleanly and without
squashing. With spring clip and safety catch The special blade shape prevents the wire rope
from splaying, little effort required due to very high transmission ratio. Plastic-covered handles.
Application:
For Bowden cables and soft wire ropes (also stainless steel).
Order
No.
Cutting values wire rope ∅
mm
5411
Length
mm
0150
3
21.00
150
(W525)
Bowden wire cutters
Design:
Body of tool made of fibreglass-reinforced plastic with soft inlays for secure grip, with
opening spring and safety catch. Conical ends for work in confined spaces.
Application:
For the stripping of all conventional round and wet-room cables
(e.g. NYM 3 x 1.5 mm
2
to 5 x 2.5 mm
2
), data cables (CAT 5–7, twisted pair) and coaxial cables.
Order
No.
Working area ∅
mm
5412
Conductor cross-section
mm
2
0005
8–13
30.40
0.2 + 0.3 + 0.8 + 1.5 + 2.5 + 4.0
(W525)
Stripping tool
m
Wire rope shears/stripper
926