933 / 1618
5/59
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Hand Tools
5
5454
Design: DIN ISO 5746.
Made of vanadium electric steel, forged, hardened and tempered in oil.
Chrome-plated head,
with angled cable mantle cutter, stripping holes and wire cutter. Blades
additionally inductively hardened (61 HRC). Handles with multi-component plastic covers, with
recessed grips and indented lettering,
insulated up to 1000 V in line with IEC 60900,
DIN EN 60900, VDE 0682/Part 201.
Application:
For stripping of round and wet-room cables (e.g. NYM cables), particularly suited
for low-laying cables due to slender head.
Order
No.
Length
mm
5376
Cutting values ∅
medium-hard/hard wire
mm
Conductor cross-section
0165
165
36.60
3.2/2.2
8-13 ∅ mm/1.5 + 2.5 mm
2
(W525)
Stripping pliers
Design:
Made of special tool steel, hardened and tempered in oil. Simple adjustment to the
wire or cord ∅ (max. ∅ 5 mm or 10 mm
2
) using the knurled screw and counter nut. With
opening spring. Plastic-covered handles.
Application:
For the stripping of single-strand, multi-strand and finely stranded conductors
with plastic or rubber insulation.
Order
No.
Length
mm
5449
5454
0160
160
11.65
14.30
(W512)
(W525)
Abisolierzange
5449
Design:
Made of special tool steel, hardened and tempered in oil. Simple adjustment
to the wire or cord ∅ (max. ∅ 5 mm or 10 mm
2
) using the knurled screw and counter nut.
With opening spring. Handles with multi-component plastic covers.
Application:
For the stripping of single-strand, multi-strand and finely stranded conductors
with plastic or rubber insulation.
Order
No.
Length
mm
5452
5455
0160
160
13.15
17.25
(W512)
(W525)
Wire-stripping pliers
5452
5455
Design:
Made of special tool steel, hardened and tempered in oil. Simple adjustment
to the wire or cord ∅ (max. ∅ 5 mm or 10 mm
2
) using the knurled screw and counter nut.
With opening spring. Handles with multi-component plastic covers.
Application:
For the stripping of single-strand, multi-strand and finely stranded conductors
with plastic or rubber insulation.
Order
No.
Length
mm
5450
5456
0160
160
15.30
19.95
(W512)
(W525)
Wire-stripping pliers
5450
5456
Design:
Made of special tool steel, hardened and tempered in oil,
chrome-plated head.
Simple adjustment to the wire or cord ∅ (max. ∅ 5 mm or 10 mm
2
) using the knurled screw
and counter nut. With opening spring. Handles with multi-component plastic covers,
insulated up to 1000 V in line with IEC 60900, DIN EN 60900, VDE 0682/Part 201.
Application:
For the stripping of single-strand, multi-strand and finely stranded conductors
with plastic or rubber insulation.
Order
No.
Length
mm
5453
5459
0160
160
17.50
22.80
(W512)
(W525)
VDE wire-stripping pliers
5453
5459
Wire-stripping pliers
m
Wire-stripping pliers
933