296 / 560
Mounting Rings, Adapter Kits & Blowers
296
This information is provided “as is” without warranty of any kind by any person,
including without limitation, the owner and the publisher.
Unit#2786043
Includes steel sleeve.
Unit#2786024
For use with direct-drive blower motors and clamp-type supports.
No. KIT187.
For use with H33 in Nutone and Broan applications.
Mounting Rings, Adapter Kits & Blowers
Unit#2786014
Unit#2786042
For use with 3.3” dia. motors. Includes gasket and (4) grommets.
Unit#2786022
Unit#2786048
Staked
8” length.
No. KIT220.
Includes one staked nut and one regular nut.
Unit#2786055
Unit#1000001
Single speed, shaded pole design with open
enclosure and sleeve bearings. Clockwise
rotation. 3.3” diameter. 208-240V. 60 Hz. 3000
RPM.
MOUNTING GROMMETS
Order
No.
Desc.
GROM6008
For 3/4” slot
GROM6000
For 1/2” slot
RUBBER MOUNTING RINGS
Order
No.
Desc.
For 5.6”, 5.0” & 4.4” Dia. Motors
KIT184
Henrite 2.50” OD
KIT183
Henrite 2.25” OD
KIT186
All Rubber 2.50” OD
For 3.3” Dia. Motors
KIT180
Henrite 1.80” OD
KIT187
Rubber mounting rings
MOUNTING ADAPTER KITS & PARTS
Order
No.
Desc.
H33
Mounting kit for 3.3” dia. Nu-tone units; includes (4) nuts
and (2) hex-hub brackets
KIT414
Adjustable casebolt mounting kit
MNT1518
Coleman “Lord” mount; 1/4” x 8-32 stud; 1/4” x 8-32 hole;
1/2” x 1/2” bushing
KIT208
3/8” x 8-32 x 3/8” studs; 1/2” x 1/2” bushing
KIT184
KIT188
KIT187
H33
KIT414
MNT1518
KIT208
NEOPRENE GASKETS
Order
No.
Bolt Circle
Dia. In.
GASKET0167
2.84
RAIN SHIELDS
Order
No.
Motor Shaft
Dia. In.
KIT170
1/2
RAIN6000
5/8
TIE RODS
Order
No.
Type
Motor
Dia. In.
KIT220
8-32 NC
5.6
KIT221
10-32 NC
4.4
WATER SLINGERS
Order
No.
Dim. In.
ID x OD
SLINGR6002
1/2 x 2
DRAFT INDUCER BLOWERS
Order
No.
HP
Amps
82862
1/35
0.50 to 0.59