EuroWire March 2016

102 / 216

wire 2016 show
➣➢➣
4th - 8th April
March 2016 100
➣➢➣
all major speci cations. Calibration is
automatically performed and documented
on all of Clinton’s new B-Series spark
testers and selected A-Series models.
Manual or assisted calibration can be
performed on older Clinton units as well
as equipment manufactured by others.
When paired with Clinton’s model SM
sensitivity tester, a complete calibration
solution to IEC and NEMA standards is
provided.
Clinton Instrument Company – USA
Website:
Cometo
Stand: 09C54
Cometo has been involved in the wire,
cable, rod and tube industry for more
than 30 years. Its continuous cooperation
with the most e cient and productive
manufacturers has made the company
a reliable partner in the supply of high
quality wire straightening machines,
guides, cutting units and traverse units.
Since its inception in 1983 Cometo has
strived to continually develop innovative
and original products by managing
and completing projects with e cient
after-sales service and a full supply of
spare parts. Continuous investments aim
to further develop Cometo products while
maintaining the highest level of customer
service.
Manufacturing that characterises the
company’s product range for the past
30 years has allowed Cometo to o er an
ever-expanding line of quality products
with the introduction of complete wire
straightening and cutting machines
complete with wire pay-o s.
Cometo Srl – Italy
Website:
Condat
Stand: 10A52
With 160 years of expertise, Condat’s
lubricant range is recognised as a
reference in the metal forming market,
especially for wire drawing processes
(mechanical and electrical wire).
Its Vica l and Steelskin range gathers
together the widest choice of wire-
drawing soaps, surface treatment, neat
and soluble oils and degreasing products.
Once con gured, the system can be
passcode protected. In cases where a
local display is not required, or centralised
process control is desired, the equipment
can be con gured and controlled directly
from PLCs or computers using Modbus
RTU (RS-485 full duplex). Optional
communication protocols include
Ethernet/IP, Pro net, and Pro bus, Modbus
TCP and analogue communications,
making the equipment compatible
with previous Clinton equipment with
analogue control.
When simple control output is all that
is required, there are four sets of relay
contacts that provide information without
requiring advanced programming. These
include “high voltage ON” signals to alert
operators of the presence of high voltage,
a fault relay which actuates when a fault
is detected, a “Voltage Watchdog” which
will change state when the test voltage
has risen above or dropped below a preset
level, and a “Bare Wire Alarm” which will
signal when long lengths of bare wire are
detected.
Clinton will also exhibit and demonstrate
the STCAL automatic spark tester
calibration system. The STCAL system
will calibrate high frequency AC, mains
frequency AC, and DC spark testers to
wire 2016 gives you the chance to get free copies of EuroWire,
Wire & Cable ASIA and wiredInUSA from the INTRAS stand 11D26.
Sta from the magazines will be on hand to answer any queries
you have, and to distribute the latest copies of the magazines,
CDs and media packs.
Copies of sister publications Tube & Pipe Technology and Tube
Products INTERNATIONAL will also be available from stand 04B27.
All our magazines will also be handed out on stand EN03 at the
main North entrance to the exhibition halls.
Grab your free copy
▲ Our magazines and CDs will be available from the INTRAS stand