March 2014
155
wire
2014
show
7 - 11 April
➣➢➣
The product range includes:
•
Payo and take-up systems ( ange-
driven systems, pintel-driven systems
and shaft-driven systems)
•
Portal payo s and take-ups
•
Rewinding lines
•
Capstan and caterpillar systems
•
Accumulator systems: Vertical, hori-
zontal, cassette, comb accumulator
•
Foil payo and take-ups
•
Multiple payo and take-up systems
•
Cooling trough systems
•
Extrusion lines
•
Special machines
•
Control systems and automation
Kurre is able to develop solutions meeting
client requirements and at short notice.
New payo and take-up systems will be on
show at wire 2014, including for products
in medical technology with a very low
tension range.
Kurre also develops concepts for extrusion
lines, eg with take-up system included.
Spezialmaschinenbau Kurre GmbH
Website
:
Lami l
Stand: 10A43
As a manufacturer of copper and copper
alloy wires, Lami l has extended its
expertise into the eld of copper speciality
wires. Its range of alloys are used in various
industries, including automotive and
aviation.
Lami l produces di erent copper alloys
which all have their speci c characteristics.
These alloys can be further subdivided
according to their chemical composition,
in uencing
the
tensile
strength,
elongation, electrical conductivity and
exlife of the wire.
Lami l’s production of CuMg and CuCd
show an extremely high tensile strength
(543–733N/mm
2
) for a surface-treated
wire with a diameter of 2mm. These
two alloys combine high strength with
good conductivity. Following the very
stringent regulation of the EU, Lami l
has maintained the right to produce
CuCd as one of the only European copper
producers.
Next to wire rod and drawn wire, the
surface treated wire is one of the many
possible products Lami l can o er rst
tier companies. For certain applications
the surface nish of the wire is a critical
parameter. The technological department
of Lami l has been able to implement a
special production process that results in
an exceptional surface quality for plating.
The surface treated wire is also ideal to be
drawn to ne end diameters, thanks to its
superior processability.
Also in the packaging of these wires
interesting progress has been made,
such as the Octabins, resulting in a
cost-e ective alternative that is produced
under better working properties.
For the automotive industry Lami l is
also researching the possibilities of new
alloys in aluminium, such as 6082 and
6056. At the moment it is in the process of
testing these new alloys to explore further
possible applications.
Lami l NV – Belgium
Website
:
l.be
▲
Just part of the range from Kurre
