EuroWire March 2017

14 / 132

News
Corporate
March 2017 12
Cor oratenews
DELISI Srl specialises in manufacturing automatic straightening
and cutting machines for smooth and ribbed wires from 1 to
20mm in diameter.
Its machines are characterised by rapid change of diameter,
rapid change of the lengths and fast set up: about one minute, to
change the diameter to work.
The spinner is supplied with a straightening unit of
pre-regulated jaws for each diameter of wire to work: it is
enough to install the suitable straightening unit according to
the wire to handle, and the spinner will be ready to work without
waste of time and material.
The straightening jaws can be in polyamide for aluminium and
copper wires; in bronze for aluminium, and drawn steel stainless
steel wires; in cast iron for drawn wires; in cast iron with carbide
inserts for drawn, laminated and ribbed wires; or in integral
carbide for drawn, laminated and ribbed wires. They can also be
in Teflon or wood to fit them to the customer requirements.
The wire in the spinner is straightened through a series of bends
that do not damage it while it is moving. With the flying cut, the
shears run during the cut.
After finishing the cut, they quickly return back to the starting
point, without the wire stopping.
For a high number of short cuts, as for example when working
electrodes, Delisi can supply the machine with a continuous
cutting disc, so the cutting speed is higher and the maximum
production of 400 pieces per minute can easily be reached.
On request, the machines can be supplied with electronic
programmer and different types of pay-offs and rod collection
beds and other special devices.
Delisi Srl – Italy
Website:
Straightening and cutting machine specialist
▲ ▲ Delisi – specialist manufacturer of automatic straightening and cutting machines
for smooth and ribbed wires