1018 / 1070
Mai Offic: 405-631-9701
1018
Fax: 405-631-0585
T
|
TOOLS
HOLE SAW BLADES
5¼" BI-METAL HOLE
SAWS
with 8% Cobalt Tooth Tip
4/6 Variable Pitch Tooth combination, reduces
vibration and increases productivity. Deep
Gullet design, for improved chip removal.
Tough 3/16” Thick Back Plate. Faster cutting.
More Holes per Saw. Cuts holes in wood,
plastic, or any machinable metal, including
nail-embedded wood, plywood, pipe, stainless
steel etc.
Locke#
T1148
5¼" Bi-Metal Hole Saw
ADJUSTABLE HOLE SAW
• Can cut drywall, plywood, plaster & acrylic
sheeting up to
7/8
"
thick
(1¾" thick if opposite side can also be
drilled.)
• For cutting aluminum, brass and metal
sheets up to z" thick.
• Transparent cowl prevents chips from
injuring user.
• Can work with either variable speed hand
drill or drill press.
Locke#
T3113
EL5000 1
x
"-6
a
" hole saw
T3115
EL6000 2 - 8¼" hole saw
T3114
EL5003 Ruler Axle for
T3113
T3119
EL6003 ruler axle for
T3115
T3124
EL5004A 1
n
" Long Blade,
Blade A for cutting drywall, wood
and other soft materials.
T3125
EL5004B 1½" Long Blade, Blade
B for cutting metal and cement
plaster (stucco).
T3126
EL5001 Pilot Drill Bit
TUNGSTEN CARBIDE
TIPPED HOLE CUTTER KIT
Cuts sheet metal, stainless steel, iron, cast
iron, copper, abrasive materials such as high
density resin and metal plate. Cuts up to 3/16"
deep. Over 300 holes in stainless steel plate.
Auto ejecting slug.
Contains 1 each:
d
", 1
8
", 1
a
", TCT hole cutter
spare pilot bit, ejector spring and hex wrench.
Cutters in the kit provide conduit entry for ½",
¾" and 1" conduit.
Locke#
T1134
Carbide Tipped Hole Cutter Kit
TUNGSTEN CARBIDE
TIPPED HOLE SAWS
Cuts sheet metal, stainless
steel, iron, cast iron, copper,
abrasive materials such as high
density resin and metal plate.
Cuts up to 3/16" deep. Over 300
holes in stainless steel plate.
Auto ejecting slug.
Locke#
T1122
3/4" Carbide Tipped Hole Cutter
T1123
7/8" Carbide Tipped Hole Cutter
T1124
1
8
" Carbide Tipped Hole Cutter
T1125
1¼" Carbide Tipped Hole Cutter
T1126
1
a
" Carbide Tipped Hole Cutter
T1127
1½" Carbide Tipped Hole Cutter
T1128
1¾" Carbide Tipped Hole Cutter
T1129
2" Carbide Tipped Hole Cutter
T1131
2½" Carbide Tipped Hole Cutter
T1132
2
s
" Carbide Tipped Hole Cutter
T1133
3" Carbide Tipped Hole Cutter
T0929
¼" Carbide Tipped Pilot Bit
CARBIDE GRIT HOLE
SAWS
Cuts brick, concrete block, fiber cement siding
& backer board, stucco, old plaster. Concrete
pavers. Diameters 3/4" through 4
8
". Works
in rotary and SDS Hammer mode. Works
forward and reverse. Drill a hole through
cement takes less than 7 seconds.
Locke#
T1138
1
a
" Carbide Grit Hole Saw
T1139
1½" Carbide Grit Hole Saw
T1140
1¾" Carbide Grit Hole Saw
T1141
2" Carbide Grit Hole Saw
T1143
2½" Carbide Grit Hole Saw
T1144
3" Carbide Grit Hole Saw
T1145
3
s
" Carbide Grit Hole Saw
CARBIDE GRIT
ELECTRICIAN’S KIT
Cuts brick, concrete block, fiber cement siding
& backer board, stucco, old plaster. Concrete
pavers. Diameters 3/4" through 4
8
". Works
in rotary and SDS Hammer mode. Works
forward and reverse. Drill a hole through
cement takes less than 7 seconds.
Contains 1 each: 7/8", 1
8
", 1
a
", 1¾", 2", 2½".
Arbors: 7/16" hex, 7/16" quick change, 1/4"
pilot bit.
Locke#
T1146
Electricians Carbide Grit Hole Saw
Kit