130 / 1070
Main Office: 405-631-9701
130
Fax: 405-631-0585
A
|
TUB & SHOWER
EMERGENCY EYE WASH
WALL MOUNTED
Standard Equipment Bradtect™
safety yellow finish and impact-
resistant bowl. Can be mounted
on 1-¼" waste line.
General Specifications
Supplies are standard ½" IPS
and drain is 1¼" IPS.
Heads
Chrome plated brass spray
head assembly with twin soft
flow eye wash heads and
protective spray head covers.
Valve
Chrome plated brass ½" IPS
stay-open ball valve manually
operated by stainless steel
push flag handle.
Stream Control
Integral flow control assures
safe steady flow under varying
water supply conditions.
Locke#
A5000
S19-220 Wall Mounted
Emergency Eye Wash
EMERGENCY WASH FIXTURES
COMBINATION EYE WASH
& SHOWER
Model S19-310
Standard Equipment Bradtech™ safety yellow
finish and impact-resistant shower head and
eye wash bowl.
Standard Equipment Shower head
10" (254 mm) diameter yellow impact-resistant
plastic, Model S24-070.
Shower Valve
Chrome plated brass 1" IPS stay-open ball
valve operated by stainless steel pull rod with
triangle handle. Pull open - push close. Self-
closing valve spring adapter: Order Part No.
S19-001.
Eye Wash
10" diameter yellow impact-resistant bowl,
Model S90-095. Chrome plated brass spray
head assembly with twin soft flow eye wash
heads & protective spray head covers. The
integral flow control assures safe steady flow
under varying water supply conditions.
Eye Wash Valve
Chrome plated 1 /2" IPS stay-open ball valve,
hand operated by stainless steel push flag
handle.
Standard
1¼" galvanized steel pipe, Bradtect™ safety
yellow coated, with floor flange. Provisions for
vertical/horizontal supply.
Locke#
A5020
S19-310 Combination Eye Wash/
Emergency Shower
FAUCET-MOUNT
EYEWASH
Model S19-200B
Faucet Not
Included
Low-cost eyewash mounts easily to both
standard and gooseneck faucets. Faucet
remains usable.
To eliminate the risk of scalding eyes
during use, hot water supply to the faucet
should be disconnected or tempered water
be provided.
cUPC Approved:
The Emergency Fixtures are certified
to comply with the requirements of the
Uniform Plumbing Code by the International
Association of Plumbing and Mechanical
Officials (IAPMO).
Construction:
Pipe and fittings are chrome-plated brass.
High-visible yellow dust caps are flexible
plastic.
Standard Sprayhead Assembly:
Sprayhead assembly is chrome-plated
brass. Integral flow control assures safe,
steady water flow under varying water supply
conditions from 30-90 PSI.
Adapters Included:
Chrome-plated brass adapter replaces faucet
aerator; provides for eyewash mounting
to faucet. Standard thread on fixtures fits
standard or gooseneck faucets with 55/64"
x 27 thread (male). Unit is also provided with
two adapters to convert the standard thread to
fit faucets with 15/16" x 27 thread (female) and
13/16" x 27 thread (female).
Diverter:
Chrome-plated brass diverter attaches to
adapter. Provides for one-step activation
which complies with ANSI Standard Z358.1-
2004 when installed and used properly.
Standard Equipment
Faucet-Mount Eyewash Includes:
Chrome-plated brass eyewash unit with twin
sprayheads, yellow plastic pop-off dust caps,
faucet adapter, and diverter.
Locke#
A5022
S19-200B Combination Eye
Wash/Emergency Shower