2014 Locke Supply Co.

147 / 1070

Credit: 405-631-9756 147
C
|
CLOSETS
WATER CLOSETS WITH MACERATING PUMPS
MACERATING PUMP KIT
Besides it sleek, modern styling,
Saniplus gives you the satisfaction of
being environmentally friendly. The
Saniplus unit requires just 1.6 U.S gals (6
liters) of water per flush, less than a 1/3
of what most conventional toilets require.
Great styling. Ease of installation. And
water conservation to boot. All good
reasons to choose Saniplus for your next
bathroom renovation.
• Dimensions in inches
H12 x W 21 x D 9
• Dimensions in cm
H 30 x W 53 x D 23
• Dimensions include Pump only
• Motor Induction
• Amperage 4.5
• Voltage 110
• HP .4
• Head feet 12
• Head meters 4
• Volume g/m 7.35
• Volume l /m 27
• Size discharge (inch) 3/4
• Maximum temp. F 104°
• Maximum temp. C 40°
Locke#
C3010 002 Macerating Pump Kit
C3013 030 Extension Pipe for
locating the pump behind a wall
Self contained toilet
with the macerator
pump and an
electrical activated
flushing action built
inside the unit.
This modern shaped
self-contained
china toilet uses
just 1.1 gallons of
water per flush. It
is a space saver. In
addition to the toilet
waste, SANICOMPACT 48 will also discharge
wastewater of a sink.
1 inch discharge pipe. 7 PSI pump.
Locke#
C3014 048 Sanicompact Toilet
4HP GRAY WATER PUMP
Flow rate at max head
USG / MIN
16 ft: 18 usg/
min;3 ft: 29 usg
Vertical Discharge 16 ft
Horizontal Discharge 150 ft
Locke#
C3015 008 HD Gray Water Pump
3HP GRAY WATER PUMP
Flow rate at max head
USG / MIN
14 ft: 18 gal/min;
3ft: 24 gal/min
Vertical Discharge 14 ft
Horizontal Discharge 140 ft
Locke#
C3016 021 Gray Water Pump
The Saniplus is a system that is used to install
a complete bathroom up to 12 feet below the
sewer line, or even up to 150 feet away from
a soil stack. The Saniplus can handle up to
four fixtures, toilet, hand basin, shower and
bathtub.
The Saniplus is simple to install; there are just
four connections.
The inside of the Saniplus comprises of a
pressure chamber, which starts and stops the
unit, and the motor, which drives the stainless
steel macerator blades and the pump.
When the flush is activated, the water flowing
into the Saniplus activates a micro-switch in
the pressure chamber, which in turn starts
the motor. The motor is sealed for life in an oil
filled enclosure. A common spindle drives the
impeller and the macerator blades.
REAR DISCHARGE
CLOSET
The Saniplus unit requires just 1.6 U.S
gals of water per flush, less than a 1/3 of
what most conventional toilets require.
Great styling. Ease of installation. And
water conservation to boot. All good
reasons to choose Saniplus for your next
bathroom renovation.
This closet is available only in white.
The seat is NOT included. This closet
uses standard FluidMaster 400 ballcock
and flapper valve.
Locke#
C3011 007 Elongated Bowl
C3012 005 Tank for C3011