269 / 1070
C edit: 405-631-9756
269
www.lockesu
ly.comG
|
IRON PIPE
CONNECTORS & TRAP PRIMERS
FLExIbLE "J" bEND
Replaces 1¼" or 1½" plastic or metal
drain traps. Flexible PVC adjusts to pipe
misalignment. Provides a long lasting leak-
free connection that resists freeze damage.
Squeezes to clean, no drain tools or cleaners
needed.
Locke#
G0243
1¼"-1½" x 1½" Flexible Trap
TrAp-EASE™ TrAp
PRIMER TAILPIECES
• Gravity feed, no mechanical parts
• Replenishes water in floor drain traps
to prevent the escape of sewer gases
Locke#
G0080
200-092 1½"x8" Chrome Direct
Connect Trap primer tailpiece
G0081
213-092 1¼"x6" Chrome Fine
Thread Trap primer tailpiece
prEDCO TAppING
SADDLE WITH EpOxY KIT
G0241
G0242
Locke#
G0241
4" Tapping Saddle With Epoxy Kit
(Tulsa Code)
G0200
Epoxy Kit Only for G2041 Predco
Tapping Saddle
DONUT TO USE WITH
prEDCO SADDLE
Locke#
G0242
4" Schedule 40 DWV Donut to use
with
G0241
prEDCO SADDLE bANDS
For pipe up to 15"
Locke#
G0201
Saddle Band up to 15"
FLExIbLE SADDLE
One saddle fits pipe 4" to 12" diameters. Has
stainless steel clamps.
Locke#
G0451
4" Inlet Tee
G0452
6" Inlet Tee
prIME-rITE TrAp
PRIMER VALVE
This innovative trap priming
system automatically primes up
to four floor drain traps using our
patented water distribution system.
The PRIME-RITE requires no
adjustments but must be installed
on a cold fresh water line of 1 1/2”
diameter or less. The priming valve
is automatically activated when it
senses a pressure drop of 5 to 10
P.S.I.G.
Operating range: 35 to 75 P.S.I.G.
Locke#
G0060
PR-500 PTrap Primer Valve
TRAP PRIMER
DISTrIbUTION UNIT
A metered amount of water
from the floor drain trap primer
is distributed to as many
as four (4) floor drain traps
by means of the patented
distribution unit.
Locke#
G0065
DU-U Trap Primer Distribution
Unit
AUTO TrAp prIMEr
A necessity where drains are infrequently
used. It should be installed a min. of 6"
above grid of floor drain or flood level rim of
equipment served.
Locke#
M0566
½" F.I.P. Sani-Guard Auto. Trap
Primer, used with
r1198
floor drain