2014 Locke Supply Co.

495 / 1070

Credit: 405-631-9756 495
L
|
HVAC
SLEEVE BEARING
BRACKET KIT
Ideal for replacing obsolete pillow blocks and
streamlined bearings. May also be used in
some evaporative cooler applications.
Locke#
L2750 029175-01 ¾" Bearing Bracket
L2751 029176-01 1" Bearing Bracket
SLEEVE SEALED
TyPE BEARING WITH
INSULATOR
Self-aligning, factory packed
with plastic petroleum assuring
proper lubrication during long
life of bearing. Self-aligning
porous bronze sleeve.
Locke#
L2734 38-2443-03 1" I.D. x 2½" O.D. as
measured over rubber cushion.
OIL SLEEVE BEARINGS
(Replaces Brundage)
Self-oiling with sintered bronze
bushings and drive type oil
cups.
Locke#
L2736 38-2696-01 ¾" I.D. x 2z" O.D.
as measured over rubber cushion
RANDALL OIL TyPE
BEARINGS WITH
INSULATOR
Self-aligning, self-oiling with
sintered bronze bushings and
drive type oil cups.
Locke#
L0926 38-2450-01 ¾" Shaft Dia., 1A"
O.D.
SHAFTS
When a bearing fails, the shaft is inevitably
scored. If not replaced it will destroy the new
bearings. Premium shafting is ground and
polished to a mirror finish. Excess shaft may be
cut off.
Locke#
L0925 38-2096-01 ¾" x 20" Shaft
L2732 38-2095-01 1" x 25" Shaft
L2733 38-2492-01 1" x 35" Shaft
THRUST COLLAR KIT
Sheet metal thrust collar in ¾", s" & 1" size.
All with hollow head (Allen) set screws.
Kit consists of 1 pr. packaged with thrust
washers.
Locke#
L2744 38-2207-01 1" Thrust Collar Kit
VARIABLE PITCH MOTOR
PULLEyS
Precision built for perfect
balance, to assure smooth,
vibration free performance.
Permits speed variation of
approximately 30%. Grooves are
accurately finished for proper
belt seating, insuring max. drive
efficiency and long belt life.
Finished for corrosion resistance and tested
for true running. (Standard Keyway on all sizes
except ½".)
Locke#
L2721 270-069-01 ½" x 3¼" Cast Iron
Motor Pulley
L2722 270-072-01 s" x 3¼" Cast Iron
Motor Pulley
L2723 270-089-17 ½" x 4" Cast Iron
Motor Pulley
L2724 270-089-12 s" x 4" Cast Iron
Motor Pulley
SHAFTS, RAINSHIELD, BRACKETS & PULLEYS
PILLOW BLOCK
BEARINGS
Heavy neoprene cushioned. Re-oilable
porous bronze bushing in a pressed steel
ball unit held firmly in a housing of two-piece
interlocking steel. Self-aligning, static free
and quiet operating. Two 8" rubber spacers
provided for use if needed.
Locke#
L0924 38-2086-01 Pillow Block
Bearings - ¾" Shaft Diameter
PILLOW BLOCK BALL
BEARINGS
Temperature Range: -30 to 200° F. Durable
cast-iron construction, pre-lubricated
bearings, & re-greasable.
Locke#
L2739 38-2567-01 ¾" Pillow Block
Ball Bearing - pair
L2740 38-2568-01 1" Pillow Block
Ball Bearing - pair
PILLOW BLOCK SLEEVE
BEARINGS
Heavy neoprene cushioned. Re-oilable
porous bronze bushing in a pressed steel
ball unit held firmly in a housing of 2-piece
interlocking steel. Self-aligning, static free
and quiet operating. This high quality pillow
block will assure many years of trouble-free
performance.
Locke#
L2738 38-2087-01 1" Pillow Block
Bearing - pair