2014 Locke Supply Co.

865 / 1070

PVC DRAINS AND BACKWATER VALVES
ROOF DRAIN
PVC roof drain
with cast iron
dome
Locke#
R1020 4" Roof Drain
ADJUSTABLE ON-GRADE
FLOOR DRAIN
with Cast Metal Ring & Strainer
• Highly polished cast metal
top provides a fantastic
finished look.
• Standard threads on drain
throat for easy adaptability to
any standard FIP adapter.
• Brass female thread inserts for strainer
screws.
Locke#
R1199 843-36PNR 3" Drain with cover
HEAVY DUTY FLOOR
DRAINS WITH META RING
Locke#
R1200 3" Heavy Duty Floor Drain
R1198 3" Floor drain with trap primer, use
with M0566 Auto. Trap Primer
R1196 Strainer for 5" Nickel bronze for
R1198 and R1200
3"-4" ADJUSTABLE
CLEAN-OUT WITH META
RING
Fits over 3" & inside 4"
schedule 40 pipe & 6"
diameter access cover, PVC.
3" IPS tailpiece adjusts to
desired finish level.
Locke#
R1201 3" Adjustable Clean-out
DRAIN GRATE
Locke#
R0640 4" Drain Grate
FLOOR SINK
with Aluminum Beehive Strainer,
3”
Sink has 14” x 14” square top, 12” diameter
grate hole. 5½” deep sump area. Interior
surfaces are sloped and smooth to allow
maximum sanitation.
Locke#
R1202 3" With NO Grate
R1204 Full Grate only for R1202
R1205 ¾ grate only for R1202
R1207 Replacement aluminum beehive
strainer
VERY COMPETITIVE
FLOOR SINK DRAIN
Fits 3" PVC couplings /
fitting hubs.
Locke#
R1212 3" PVC Floor Sink,12x12 flange
R1214 Full grate only for R1212 Drain
R1215 ¾" Grate only for R1212 Drain
R1216 3" bottom alum. dome strainer
PVC FLOOR DRAIN
6½"Round nickel Ring &
Strainer. 2" Connection Size.
Adjustable AFTER the pour.
ABS/PVC Base Adapter, ABS
Coring Sleeve and Head
Adapter.
Locke#
R1203 832-2PNR 2" PVC floor drain
R1206 832-36PNR 3" PVC floor drain
PVC FLOOR DRAIN
One piece. Only one glue joint needed to
install. Full 3" evaporation seal built-in trap.
Unbreakable strainer with 2 screws.
Locke#
R0972 800P 2" PVC flr drain with c.o.
FLUSH-FIT SNAP-IN
DRAIN
• All plastic
• May be solvent welded or simply inserted in
pipe
• Allows cutting pipe flush with floor
• May be used as a strainer for vent stack or
air inlet
• Fits Schedule 40 PVC DWV pipe
Locke#
R1030 2" Snap-In Drain
R1031 3" Snap-In Drain
R1032 4" Snap-In Drain
INSERT PLUGS
DWV plastic insert plugs used to close off
drains for pressure test.
Locke#
R0808 1½" Insert Plug
R0809 2" Insert Plug
R0810 3" Insert Plug
R0811 4" Insert Plug
PLASTIC TEST CAP
Locke#
R0812 1½" & 2" DWV pipe test cap
R0813 3" & 4" DWV pipe test cap
GLUE ON TEST CAP
Locke#
R0814 1½" DWV End Cap, glue on
R0815 2" DWV End Cap, glue on
R0816 3" DWV End Cap, glue on
R0817 4" DWV End Cap, glue on
Credit: 405-631-9756 865
R
|
PLASTIC PIPE