Jantz Catalog 52

73 / 116

PAGE 73 PRICES SUBJECT TO CHANGEWITHOUT NOTICE
ADHESIVES JANTZ SUPPLY ★ 1-800-351-8900 ★
ZAP-A-GAP the best instant glue in the world.
The ability to bond virtually anything with
consistency. A little goes a long way! Only
apply enough glue to evenly coat the area to
be bonded. ZAP CA is the thinest superior
penetrating glue. It bonds instantly. ZAP
CA+ (PT01) is for gap filling. The penetrating
ability allows it to go where most cannot
and will harden soft areas and helps prevent
cracks, cracks almost disappear, great for
both stabilized and natural woods. 7-10 secs
for positioning. Works on oily surfaces. Cures
in about 20 sec. Use ZIP KICKER for a faster
cure. Z-7 DEBONDER will soften CA glue prior
to sanding. Removes any instant glue from
skin, work surfaces, many other uses. ZAP
GEL will not run nor flow. Super thick jelly like
CA. The strongest CA glue available. Tube
has tip to allow precise application. Great
for stones, inlays, other small parts. Allows
plenty of time for working before cures.
Can Not Ship PT15 or PT16 Air.
CAT.# DESCRIPTION PRICE
PT01 ZAP A GAP CA+ 2 oz. 13.99
PT07 ZAP A GAP CA 2 oz. 13.99
PT26 ZAP A GAP GEL .7 oz. 8.79
PT15 ZIP KICKER 2 oz. 6.99
PT16 Z-7 DEBONDER 1 oz. 4.79
CAT.# DESCRIPTION SIZE PRICE
SC101 Hot Stuff Original 2 oz 12.95
SC102 Hot Stuff Original 4 oz 24.59
SC103 Super T Medium 2 oz 12.95
SC104 Super T Thick 2 oz 13.45
SC105 Quick Accelerator 6 oz 15.95
SC106 Solvent Debonder 2 oz 10.95
SC107 Pro Tips Extensions Pkg 2 .95
SC108 Hot Tips Spout & Cap Pkg 2 2.47
WEST SYSTEM epoxy cures to a high-strength
plastic solid at room temperatures, by mixing
105 liquid epoxy resin and 206 hardener in a
5:1 ratio. Designed specifically to bond to a
wide range of materials including fiberglass,
many metals, wood fibers, reinforcing fabrics,
foam and other composite materials. This
highly moisture-resistant plastic is highly
recommended when extended working and
cure time are needed or to provide adequate
working time at higher temperatures. The 206
slow-cure hardener has a working time of 90
to 110 minutes at 70°F with a minimum cure
temperature of 60°F. Cure time for maximum
strength is 1-4 days. West Epoxy is easy to
sand and shape when cured and does not
shrink after curing.
G/flex epoxies are toughened, resilient two-
part epoxies engineered for superior grip to
metals, plastics, glass, masonry, fiberglass,
and difficult to bond woods. G/flex epoxies
make bonds that absorb the stresses of
expansion, contraction, shock and vibration.
Easy-to-use 1:1 mix ratio gives you 46 minute
pot life and a working time of 75 minutes at
room temperature. Initial cure in 3-4 hours
with workable cure in 7-10 hours.
Easy-to-use, fast curing epoxy system for
quick repairs, tooling and general bonding.
Use for spot application to hold parts in place
while standard epoxy bonds cure. Bonds to
wood, fiberglass, and metal. 1:1 mixture.
Cures in 3-5 minutes. 4 fl. oz resin and 4 fl.
oz hardener.
Designed for convenient and accurate
metering of #105 resin and #206 hardener.
Calibrated to delivery approximately 0.8 fl oz
of resin / hardener with one full stroke. Set
contains one resin pump and two hardener
pumps which mount directly on the containers
eliminating mess and waste. Read and follow
priming, ratio verification, and operating
instructions included with pumps.
Bond porous and non-porous materials
including; wood, metal, carbon fiber and other
composites and plastics with this selection of
high quality CA glues. Store unopened bottles
in the freezer to extend shelf life. Bottles
which have been opened will experience a
shorter shelf life if they are continually taken
out of and put back into cold storage.
Hot Stuff Original is a thin CA glue with
water-like viscosity (3cps). Will wick into
tight-fitting joints of non-porous material. Fill
and stop spread of splits and hairline cracks
in wood and stone. Strengthen stone and
porous wood by applying to entire surface
allowing to soak into the pores and cracks.
Use as a final finish for small knife handles
or pens. Cure time is three to five seconds
between tightly fitting, non-porous parts.
Super T Gap Filler is a medium gap
filling glue with a viscosity similar to syrup
(200-300 cps). Perfect for gluing somewhat
porous materials and pieces which don’t fit
tightly. Super T cures within 10-25 seconds
giving you additional positioning time. For
best bond of two pieces, apply Super T to
one piece and accelerator to the other – push
together and hold tightly for 30 seconds.
Special T Gap Filler is a thick gap filling
glue with a viscosity similar to honey (1150-
1500 cps). Used to fill large gaps and glue
parts that don’t fit well together as well as
fill cracks and gaps in handle materials to
preserve structure integrity while sealing from
moisture and contaminants.
NCF Quick Accelerator will decrease
cure time with only a light mist applied
from 8-12 inches away. Designed to flash
off instantly so do not over-apply (you will
see a wet look if you use too much). Over-
application can discolor some surfaces –
especially stone.
Super Solvent used to debond and
dissolve CA glue from your hands and other
surfaces. A small amount usually does the
trick. Safe to use with most paints and
finishes but testing on an inconspicuous area
is recommended.
Spout, Cap and Pro Tip Extensions Use
Pro Tip Extensions with the spout for greater
precision in glue application. Replacement
spouts and caps may become necessary if
glue drips on cap or clogs tip.
Can Not Ship By Air.
Epoxy based liquid
colorants used to
tint epoxy mixture
and provide an even
color base for the
final finish system.
Add to mixed resin/
hardener at a rate
of approx. 1 tsp of
pigment to 8 fluid oz
epoxy. More pigment increases opaqueness
and mixture viscosity. One 4 fl oz bottle will
tint approximately 1-1/2 gallons of epoxy.
CAT.# DESCRIPTION PRICE
WE105A 1 qt #105 Resin 39.71
WE105B .98 Gallon #105 Resin 99.73
WE206A .44 pt #206 Slow Hardener 20.50
WE206B .86 Quart #206 Slow Hardener 46.06
CAT.# DESCRIPTION PRICE
WE6508 G/Flex Liquid 4 oz. 22.49
WE6558 G/Flex Pre-Thickened 4.5 oz. 24.65
CAT.# DESCRIPTION PRICE
WE8654 5 Minute Adhesive 21.48
CAT.# DESCRIPTION PRICE
WE300 Mini Pump Set 15.69
CAT.# COLOR PIGMENT PRICE
WE5018 White 17.95
WE5028 Black 17.95
WE5038 Gray 17.95
West System Adhesive West System CA Glues
& Fillers
ZAP A GAP Adhesives
105/206 Epoxy
G/Flex® Epoxy
5 Minute
Adhesive
Mini Pump Set
Color Pigments