Jantz Catalog 52

89 / 116

PAGE 89 PRICES SUBJECT TO CHANGEWITHOUT NOTICE
RASPS - FILES JANTZ SUPPLY ★ 1-800-351-8900 ★
Principally used to file circular openings or
concave surfaces. Tapered slightly towards
point. This file is generally referred to as a
rat-tail file.
CAT.# LENGTH CUT PRICE
CTN11716 6" Bastard 6.95
CTN11748 6" Second Cut 7.95
CTN11781 6" Smooth 8.95
CTN40651 6" 0 Cut 16.95
CTN40645 6" 00 Cut 16.95
CTN11904 8" Bastard 7.95
CTN11936 8" Second Cut 8.95
CTN11969 8" Smooth 9.95
CTN12019 10" Bastard 9.95
CTN12051 10" Second Cut 11.95
CTN12084 10" Smooth 12.95
Enlarged close-up shows the unique pattern
of narrow chip breakers created by steep
and angled serrations. This maximum cutting
surface design gives rapid removal and
smoother finish. “Magicut” is a machinist’s all
purpose file, which removes stock rapidly and
leaves a smooth finish at the same time, thus
eliminating the need for extra filing strokes.
CAT.# LENGTH PRICE
CTN07894 8" 11.95
CTN07917 10" 14.95
CTN07941 12" 18.95
Flat files are used by machinists, machinery
builders, ship and engine builders, repair
men and others who require rapid removal of
metal. They are rectangular in cross section
and taper slightly towards point in width.
Double-cut on both sides, single-cut on both
edges.
CAT.# LENGTH CUT PRICE
CTN03566 8" Bastard 10.95
CTN03599 8" Second Cut 11.95
CTN03632 8" Smooth 12.50
For sharpening mill or circular saws. Also
for draw-filing and finishing metals. All sizes
tapered slightly in width. Two square edges.
Single-cut on sides and edges. This is the
most used file in the industry and is usually
considered a general purpose file.
CAT.# LENGTH CUT PRICE
DX32368 4" Bastard 5.50
CTN08354 6" Bastard 5.95
CTN08385 6" Second Cut 8.50
CTN08416 6" Smooth 8.95
CTN08497 8" Bastard 6.95
CTN08529 8" Second Cut 9.50
CTN08560 8" Smooth 10.50
CTN08642 10" Bastard 8.95
CTN08673 10" Second Cut 11.95
CTN08704 10" Smooth 12.50
CTN08737 12" Bastard 13.95
CTN08768 12" Second Cut 14.95
CTN08799 12" Smooth 16.50
This new round smooth chain saw file
is a product of extensive research and
development in the engineering laboratories
of Nicholson. This new round smooth chain
saw file is the smoothest-feeling, fastest-
cutting and best-finished.
CAT.# LENGTH DIAMETER PRICE
CTN01576 6" 1/8" 4.50
CTN01630 6" 5/32" 4.50
CTN01765 8" 3/16" 4.50
CTN01888 8" 7/32" 4.50
CTN01974 8" 1/4" 4.50
Pattern maker's cabinet rasps. Narrow
pattern. These are the rasps stockmakers use
the world over for their shape and outstanding
cutting ability.
CAT.# LENGTH DESCRIPTION PRICE
CTN18846 10" Second cut #49 47.95
CTN18861 10" Smooth #50 55.95
Cut faster than regular mill files and leave a
smoother finish. Bastard cut. Edges do not
cut. All long angle files are single-cut.
CAT.# DESCRIPTION PRICE
CTN07688 12" Long Angle Lathe File 22.50
For filing slots, keyways and general surface
filing. Tapered slightly towards point. Double
cut.
CAT.# LENGTH CUT PRICE
CTN13081 8" Bastard 10.95
CTN13114 8" Second Cut 12.50
CTN13147 8" Smooth 13.50
Rounded on one side. Flat on the other.
Used on concave and convex as well as flat
surfaces. Backs of all half round bastard files
are double-cut. The backs of all half round
second cut files longer than 6" are double-
cut, the 6" files are single-cut. The flat sides
of all half round files are double-cut.
CAT.# LENGTH CUT PRICE
CTN04795 6" Bastard 12.95
CTN04828 6" Second Cut 13.95
CTN04861 6" Smooth 14.75
CTN04896 8" Bastard 15.50
CTN04927 8" Second Cut 16.95
CTN04960 8" Smooth 17.95
CTN04995 10" Bastard 18.50
CTN05026 10" Second Cut 20.50
CTN05059 10" Smooth 22.50
Parallel in width and gently tapered in
thickness. Overcut is parallel to file edges and
upcut is 90 degrees to overcut. Used to put
a crosscut checkering pattern in metals, Also
used in creating thumb grooves on the spine
of a blade, known as jimping.
CAT.# LINES PER INCH PRICE
GNCF00 20 48.95
GNCF0 30 48.95
GNCF1 40 51.95
Nicholson file handle with interchangeable
cushion inserts to fit a full range of files.
CAT.# DESCRIPTION PRICE
CTN21474 File Handle 5.75
Nicholson makes this file cleaner, therefore
you know it is the finest available. For general
cleaning of file teeth, works great even on
your finest cut files. Overall length is 10".
CAT.# DESCRIPTION PRICE
CTN21467 File Cleaning Brush 18.45
This versatile tool is really four in one - with
a file section and a rasp section on the flat
side and a file section and a rasp section on
the half round side. Every homeowner, garage
man, boat builder and mechanic needs one.
CAT.# LENGTH PRICE
CTN18924 8" 13.50
Great for the rapid removal of wood.
CAT.# LENGTH PRICE
CTN19427 10" Half Round Bastard 19.95
Thin rectangular shape, double cut on sides,
single cut on edges. Use in narrow spaces
where other files will not fit.
CAT.# LENGTH CUT PRICE
CTN16761 8" Bastard 13.95
CTN16794 8" Second 15.50
CTN16827 8" Smooth 17.50
Triangular shape files taper slightly towards
the point.
CAT.# STYLE LENGTH PRICE
CTN14224 Slim 6" 5.50
CTN14665 Extra 6" 5.50
CTN15024 Double Extra Slim 6" 5.50
Pillar files are similar in shape to hand files
but only two-thirds as wide. Double-cut on
two sides only. Edges do not cut.
CAT.# DESCRIPTION PRICE
CTN40281 8" X-Narrow 00 Cut 38.95
CTN31238 4" Regular 00 Cut 21.95
Round Files
Magicut Files
Flat Files
Mill Files
Chain Saw Files
American Pattern Rasps
Long Angle Lathe File
Square Files
Half Round Files
Checkering Files
File Handle
File Cleaning Brush
4 -In-Hand
Wood Rasps
Warding Files
Taper Files
Pillar Files