![Show Menu](styles/mobile-menu.png)
![Page Background](./../common/page-substrates/page0052.jpg)
50
Website
RBLWAREHOUSE.COMOrder Desk
1.800.272.9671
Suspension
VEHICLE PROTECTION
JSPEC™ Suspensions are backed by the JKS Lifetime Limited Warranty and your Jeep
®
is Covered by the Factory Protection Plus Program.
There is no need to wait for the factory warranty to expire before making your Jeep
®
an off-road beast. To learn more about the Factory Protection Plus Program, visit
560plus.comATTENTION:
THIS IS A QUICK REFERENCE GUIDE. PLEASE CONTACT YOUR SALES REP FOR ORDERING. MANY ACCESSORIES NOT LISTED...
CONTACT YOUR SALES REP FOR COMPLETE INFORMATION OR VISIT
JKSMFG.COMJSPEC 2.5” & 3.5” WRANGLER JK
SUSPENSION SYSTEM FEATURES
• Front and rear dual rate coils springs
• Fox 2.0 Evolution Series front and rear shocks
• JKS MFG front adjustable trackbar
• JKS MFG front sway bar quicker disconnects
• Front and rear brake line relocation
• Rear track bar bracket
• Front and rear bump stop extensions
SUSPENSION 2DR/4DR PART#
2.5” Lift
2DR/LHD
PN
103K
1,2,4,5
2.5” Lift
4DR/LHD
PN
102K
1,2,4,5
3.5” Lift
2DR/LHD
PN
101K
1,3,4,5
3.5” Lift
4DR/LHD
PN
100K
1,3,4,5
2.5” Lift
2DR/RHD
PN
107K
1,2,4,5
2.5” Lift
4DR/RHD
PN
106K
1,2,4,5
3.5” Lift
2DR/RHD
PN
105K
1,3,4,5
3.5” Lift
4DR/RHD
PN
104K
1,3,4,5
NOTES
1
Rear Trackbar Brace [JKS PN: OGS169] is strongly
recommended to reinforce weak factory mount on
axle.
2
Max. Recommended Tire Size 33x12.50 on 16x8
wheels with 4.5” backspacing
3
Max. Recommended Tire Size 35x12.50 on 16x8
wheels with 4.5” backspacing
4
Install Time: 5-6 hours
5
Rubicon Sway Bar Link hardware included.
JSPEC 3.5”
WRANGLER JK
J KONTROL
SUSPENSION
SYSTEM
• Dual Rate Coil Springs
• Fox 2.0 Evolution Series Shocks
• JKS Front Adjustable Track Bar
• JKS Front Sway Bar Quicker Disconnects
• Front and Rear Brake Line Relocation
• Rear Track Bar Relocation Bracket
• Front and Rear Bump Stop Extensions
• Front Control Arm Relocation Brackets
• Front Track Bar Relocation Bracket
• Flipped Drag Link
SUSPENSION 2DR/4DR PART#
3.5” Lift
2DR
PN
109K
1,2,3,4
3.5” Lift
4DR
PN
108K
1,2,3,4
NOTES
1
Rear Trackbar Brace [JKS PN: OGS169] is strongly rec-
ommended to reinforce weak factory mount on axle.
2
Max. Recommended Tire Size 35x12.50 on 16x8
wheels with 4.5” backspacing
3
Install Time: 5-6 hours.
4
Rubicon Sway Bar Link hardware included.
JSPEC WRANGLER JK ADVANCED
GEOMETRY UPGRADE KIT
• Reduced control arm angles
• Corrects caster for 2”-4.5” of lift
• Improves the front drive shaft CV joint
operating angles through full wheel travel
• Brackets are made from heavy-duty 7GA steel
and are fully boxed and welded for superior strength
2DR/4DR - PN
2450
WRANGLER JK
DRAG LINK FLIP KIT
• Increase ground clearance.
• Provide better performing,
solid steering feel.
• Flattens out steering angle when
combined with 2” lift or more.
• 7/8” Step Drill Bit Included
2DR/4DR - PN
1210
NOTES
1
For use on LHD JK models with at least 2” of suspension lift
2
Requires 3” of front bump stop extension – JKS1130 available separately
3
Should not be combined with other track bar relocation system
4
Can be used with factory replacement adjustable track bars
5
To be used with factory pitman arm for proper geometry
JSPEC WRANGLER TJ
2” SUSPENSION
SYSTEM FEATURES
• Front and rear dual rate coils springs
• Jspec custom valved gas shocks
• JKS MFG front adjustable trackbar
• JKS MFG front sway bar quicker disconnects
• Front brake line relocation
• Rear track bar bracket
• Front bump stop extensions
NOTES
1
System fits all models 1997-2006, including Rubicon and Unlimited
2
Max. Recommended Tire/Wheel Sizes 32x11.50 on 15x8 wheels
with 4.5” backspacing or 32x10.50 on stock wheels
PN
110K
WRANGLER JK EXHAUST
EXTENSION KIT
• CNC precision machined DOM steel tube spacers.
• Provides clearance between front drive shaft and cross over tube.
• Factory exhaust flare joints
NOTES
1
Required on 2012-2016
JK with 2-5’’ of lift
PN
JKS8150