357 / 560
357
Flame Sensors & Ignition Controls
This information is provided “as is” without warranty of any kind by any person,
including without limitation, the owner and the publisher.
Chemicals
Charging,
Recovery
& Welding
Test Equip.,
Tools &
Service Acc.
Electrolux
& Frigidaire
GE
& Hotpoint
Whirlpool
& Maytag
Cooking
& Gas
Products
Dishwasher,
Disposer &
Water Heater
Laundry
Refrigeration
Fittings,
Venting &
Installation
Electrical
Plumbing
Property
Maintenance
HVAC/R
Motors
Unit#2498012
HSI Systems
For use with spark ignition and flame sensing. Features alumina
ceramic insulator and high- temperature kanthal flame rod material that
can withstand 1800ºF. Can be mounted remotely on multiple burners or
adjacent to igniter on other applications.
Includes 2-1/2” long mounting flange to sensor tip and 1-9/ 16” length
sensor offset. 90º sensor offset angle.
Unit#2498012
For use with spark ignition and flame sensing. Features alumina
ceramic insulator and high- temperature kanthal flame rod material that
can withstand 1800ºF. Can be mounted remotely on multiple burners or
adjacent to igniter on other applications.
Flame sensor for Hot Surface Ignition (H.S.I.) systems. Used on these
Bryant and Carrier models: 355MAV, 345MAV, 340MAV, 350MAV,
373LAV, 58MXA, 58MVP and 58MCA.
Unit#2498012
For use with spark ignition and flame sensing. Features alumina
ceramic insulator and high- temperature kanthal flame rod material that
can withstand 1800ºF. Can be mounted remotely on multiple burners or
adjacent to igniter on other applications.
For use with Carrier LH33ZS004 igniter and Hot Surface Ignition
(H.S.I.) systems. Used on these Bryant and Carrier models: 330AAV,
330JAV, 333BAV, 333JAV, 398AAV, 58DHC, 58DXC, 58PAV, 58SSC,
58SXC, 58TUA and 58WAV.
FlameSensors&IgnitionControls
Unit#2498040
Universal – Intermittent Pilot
For use in gas-fired non-integrated forced air furnaces, boilers and
cookin appliances. Features color diagnostic LEDs. Compatible with
single or dual rod remote sensors. CSA approved.
Unit#2498040
Universal – Direct Spark
Microprocessor based control for heating appliance using LP or natural
gas. Features color LED indicator for diagnostics, 1/4” and 3/16” quick
connect terminals, program keys and damper interface. CSA approved.
FLAME SENSORS
Order
No.
Angle
°
Term.
Replaces
PFS301
45
1/4” male quick
connect
Rheem
62-23543-01
CARRIER FLAME SENSORS
Order
No.
Replaces
PFS013
Carrier LH33WZ514, LH33WZ516 & LH680013
Quality Products
Quality People
CARRIER FLAME SENSORS
Order
No.
Flame Rod Angle
Replaces
PFS014
45º
Carrier LH33WZ511,
LH33WZ515, LH680012
& LH680014
IGNITION CONTROLS
Order
No.
Input
Volts AC
Dim. In.
L x W x H
50D50-843
18 to 30
4.13 x 4.13 x
1.5
IGNITION CONTROLS
Order
No.
Input Voltage
50D50-842
25V AC