Richards Thermocouple and Temperature Sensor Catalog 16

63 / 204

The Richards Standard Head (SH) (Aluminum) is the most versatile head we offer. This head has a NEMA 4 rating for indoor or outdoor use
in non-hazardous locations. The cover and body have been polished to help prevent corrosion. The cover has a special silicon gasket, which
helps protect the connector block from wind-blown rain and dust. This gasket is also press fit into a grove to keep it from falling out when the
cover is removed for inspection. A stainless steel chain is attached to the cover and body to prevent it from getting misplaced. One of the most
beneficial advantages to this type of head is the variety of connector blocks which can be used. The Standard Head (SH) can also be fitted with
our in-head style transmitters (TS).
C
1/8”
Pipe Size
H
Example: 8K6-1012XH-12-18
Note: If you would like to order a screw cover head,
remove the (SH) from the end of the part number.
1/4”
Pipe Size
3/8”
Pipe Size
1/2”
Pipe Size
3/4”
Pipe Size
SP
Pipe Size
1”
Pipe Size
Optional Union Elbow
Change “6” to “6U” in the part number
Jab Style plug termination for angle assembly, add
termination number to end of the part number.
Example: BR08-K7 (Type K for 1/2”NPT pipe)
Straight Assemblies - Metal Tubes and Elbow - Types E, J, K & N
Manufacturing, Engineering and Sales Since 1938
Phone: 617.527.4385 Fax: 617.964.3746 Email:
Element for angle assembly
C H
Page 63 Visit our website at
C = Cold Leg
H = Hot Leg
TA6
Elbow
Angle Assemblies
Configuration 6