1255 / 1562
7/31
Articles marked ◊ are not held in stock, procurement is effected at short notice.
7
Hand Tools
Design:
Spare cutting wheel made of robust special steel. 4 hardened guide rolls with groove
for cutting close to flange and integrated deburring tool. Pressure regulated via space-saving,
specially smooth-running telescopic spindle.
Application:
For clean cutting of copper pipes with a wall thickness of up to 3 mm.
Order
No.
For pipe ∅
7201
0170
1/8–1.3/8" (3–35 mm)
27.80
(001)
0180
Spare cutting wheel
6.50
(622)
Pipe cutter ROLLER Corso Cu
7201 0170
7201 0180
Order
No.
For pipe ∅
7201
0150
1/8–2.1/2" (8–64 mm)
106.50
(001)
0160
Spare cutting wheel
13.50
(622)
Design:
Spare cutting wheel made of robust special steel, needle-bearing mounted. 4 hardened,
needle-bearing guide rolls. Pressure regulated by the stable, length-guided telescopic spindle.
Application:
For clean cutting of thin-walled, stainless steel and copper pipes, and others with a
wall thickness up to 4 mm.
Pipe cutter ROLLER Corso Cu/INOX S
Design:
Steel-forged body with guide blocks made of zinc die casting, cutting wheel made
of high-alloy, hardened steel, interchangeable without the use of tools. 2 broad guide rolls for
secure guiding of the cutting wheel at the pipe. With spring pressure system for improved
cutting and higher service life of cutting wheel. Pressure regulated via smooth-running spindles.
T-handle for highest power transmission.
Application:
For clean and right-angled cutting of steel pipes.
After cutting, the thread can be cut directly.
Order
No.
For pipe ∅
7206
0005
1/8–2" (10–60 mm)
74.20
0010
Spare cutting wheel
5.20
(574)
Pipe cutter for steel pipes up to 2"
Design:
Body made of forged steel, cutting wheel made of robust special steel, protection by
limiting infeed before contact to guide rolls. 2 hardened guide rolls. Pressure regulated by the
broad and ergonomic handle via the stable, long spindle.
Application:
For clean cutting of steel pipes with a wall thickness of up to 12.5 mm.
Order
No.
For pipe ∅
7201
0070
1/8–2" (3–50 mm)
139.10
0080
Spare cutting wheel (3–50 mm, S 8 mm)
9.90
0190
1.1/4–4" (42–115 mm)
278.10
m
0200
Spare cutting wheel (30–115 mm, S 12 mm)
23.10
m
(622)
Pipe cutter ROLLER Corso St
Design:
Spare cutting wheel made of robust special steel. 4 hardened guide rolls.
Pressure regulated via stable, length-guided spindle.
Application:
For clean cutting of plastic and composite pipes with a wall thickness
of up to 19 mm.
Order
No.
For pipe ∅
mm
7214
0020
1/8–2.1/8" (10–63 mm)
91.00
(001)
1010
Spare cutting wheel (10–63 mm, S 7 mm)
12.60
(622)
0030
2–4.3/8" (50–110 mm)
128.00
(001)
0040
4.3/8–6.1/4" (110–160 mm)
161.50
(001)
1020
Spare cutting wheel (50–315 mm, S 11 mm)
15.20
(622)
1030
Spare cutting wheel (50–315 mm, S 16 mm)
18.20
(622)
1040
Spare cutting wheel (50–315 mm, S 19 mm)
29.70
(622)
Pipe cutter ROLLER Corso P
7206 0005
7206 0010
7201 0070 + 0190
7201 0080 + 0200
7214 0020–0040
7214 1010–1040
7201 0160
7201 0150
m
m
Pipe cutter
1255