1262 / 1562
7/38
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
7
Hand Tools
Design:
Made of hardened steel. Stable design and pressure, high-sliding bending elements
and sliding pieces made of high-strength, fibre-reinforced polyamide.
Application:
For cold bending by hand or stationary in parallel vice up to 180° of e.g:
hard, semi-hard, soft copper pipes (also thin-walled)
∅ 10–22 mm
Soft, coated copper pipes (also thin-walled)
∅ 10–18 mm
Stainless steel pipes of the press-fitting systems
∅ 12–18 mm
C-steel pipes of press-fitting systems (also coated up to ∅ 18 mm)
∅ 12–22 mm
Soft precision steel pipes
∅ 10–20 mm
Electrical installation pipes DIN EN 50086
∅ 16–20 mm
composite pipe
∅ 14–32 mm
Supplied:
Bending drive, locking pins, bending segments with sliding block, bending spray
and steel case.
Order
No.
For pipe ∅
mm
7249
0010
12; 15; 18; 22
609.00
(621)
Hand pipe bender
Application:
Lightweight model with one fixed and one movable bending arm. Bending radius
display with scale of 0–180° in 30° increments and clamping mechanism for a firmer hold of
the pipe. Moveable bending arm with plastic handle.
Application:
For dimensionally accurate two-handed bending up to 180° from soft copper,
aluminium-, soft steel and brass pipe. Also suitable for bending very short pipes.
Order
No.
Nominal dimension
mm
7228
Radius R
mm
Length
mm
0095
12
94.40
36
390
0100
15
113.00
54
450
(592)
Tube benders
Design:
Compact, torsion-resistant construction. Bending radius display with scale division 45°;
90°; 135° and 180° in 15° increments, 3 pipe sizes with tight radii can be bent with one device.
Application:
Refrigeration and air-conditioning technology, oil supply, automotive, hydraulics
and compressed air technology, for precise two-handed bending of soft steel, brass and copper
pipes up to 180°.
Order
No.
For pipe ∅
mm
7228
0110
6; 8; 10
67.00
(592)
Tube benders
Design:
With mechanical ratchet feed and ergonomic handle. Bending segments can be easily
changed with the bayonet lock.
Application:
For precise one-handed bending of soft copper and aluminium pipes, soft, coated
copper pipe as well as precision steel pipe up to 90°. For the production of U-bends, counter-
bends, swan-neck bends and connecting bends at all levels.
Supplied:
Plastic case, basic device, backing plate, backing segment and 4 bending segments.
Order
No.
For pipe ∅
mm
7224
0111
6; 8; 10; 12
255.00
(591)
Single-hand pipe bender, with ratchet feed
Benders
1262