133 / 1562
1/113
Articles marked ◊ are not held in stock, procurement is effected at short notice.
1
Cutting Tools
Design:
Consisting of holder, countersink pilot pins. The GFS pin-countersink combination
system covers a wide range of drilling and countersinking combinations due to the holder
variation options with the countersinks and pilot pins.
This results in the following advantages:
1. Only 4 holder sizes are required for a working range of 5 mm to 85 mm.
2. The pilot pins rotating versions in size 1 from ∅ 8.5 mm and in size 2 from ∅ 14.0 mm
and are provided with internal cooling.
3. Pin countersinks HSS-TiN coated and with soldered carbide blades are available from stock.
4. Pin countersinks are also available with turning plate assembly from ∅ 32 mm.
5. The individual elements can be combined in anyway within one size.
6. The pilot pins can be replaced without removing the countersink.
Application:
Suitable for DIN countersinks and with the corresponding pin/countersink
combinations for step holes or countersinks outside of the norm. The holder remains in
the machine when changing. The countersink and pin are clamped using a hexagon
screwdriver according to DIN 911.
Note:
Sufficient supply of coolant is essential.
Order
No.
Countersink area
mm
1470
Set contents
0005
5 – 9
551.50
1 each pilot counter bore 5; 5.5; 6; 6.5; 7; 8; 9 (Order No. 1477)
1 each pilot pin 2.4; 2.5; 2.7; 3; 3.3; 3.5; 4; 4.5 (Order No. 1479)
1 holder shank 10 mm cyl.
0010
8.5–16.5
478.50
1 of each piloted countersink 8.5; 9.5; 10.5; 11.5; 13.5; 16.5 (order no. 1481)
1 of each pilot pin 4; 4.5; 5; 5.5; 6; 6.5; 7; 8; 8.5; 9; 9.5; 10; 10.5 (order no. 1483)
1 holder shank 10 mm cyl.
0015
8.5–16.5
478.50
1 of each piloted countersink 8.5; 9.5; 10.5; 11.5; 13.5; 16.5 (order no. 1481)
1 of each pilot pin 4; 4.5; 5; 5.5; 6; 6.5; 7; 8; 8.5; 9; 9.5; 10; 10.5 (order no. 1483)
1 holder shank MK 1
0020
14.5–24.5
665.00
1 of each piloted countersink 14.5; 16.5; 18.5; 20.5; 22.5; 24.5 (order no. 1485)
1 of each pilot pin 7; 7.5; 8; 8.5; 9; 9.5; 10; 10.5; 11; 11.5; 12; 13; 14; 15 (order no. 1487)
1 holder shank 12 mm cyl.
0025
14.5–24.5
665.00
1 of each piloted countersink 14.5; 16.5; 18.5; 20.5; 22.5; 24.5 (order no. 1485)
1 of each pilot pin 7; 7.5; 8; 8.5; 9; 9.5; 10; 10.5; 11; 11.5; 12; 13; 14; 15 (order no. 1487)
1 holder shank MK 2
0030
26 –36
1030.00
1 of each piloted countersink 26; 28; 30; 32; 33; 34; 36 (order no. 1489)
1 of each pilot pin 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 25 (order no. 1491)
1 holder shank MK 2
0035
26 –36
1030.00
1 of each piloted countersink 26; 28; 30; 32; 33; 34; 36 (order no. 1489)
1 of each pilot pin 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 25 (order no. 1491)
1 holder shank MK 3
(138)
Piloted countersink combination system
HSS
Design:
HSS. Annealed and grinding The countersink and pin are each clamped by one screw,
whereby the countersink is additionally secured against turning by a stud.
Order
No.
Size
1473
Shank ∅ d
3
mm
Overall length l
1
mm
Head length l
2
mm
Hole d
1
mm
0005
1
84.90
10
86
45
7
0010
0
73.40
10
92
42
10
0020
1
89.50
12
120
55
14
(138)
Piloted countersink holder, cyl. Shank
Design:
HSS, with internal cooling. Annealed and grinding The countersink and pin are each
clamped by one screw, whereby the countersink is additionally secured against turning by a stud.
Order
No.
Size
1475
Shank cyl. Carrier
surface DIN 1835-B
Overall length l
1
mm
Head length l
2
mm
Hole d
1
mm
0005
1
94.10
20
105
55
14
0010
2
105.00
25
135
75
22
(138)
Piloted countersink holder, cyl. Shank with internal cooling.
Design:
HSS. Annealed and grinding. The countersink and pin are each clamped by one screw,
whereby the countersink is additionally secured against turning by a stud.
Order
No.
Size
1473
Shank
Overall length l
1
mm
Head length l
2
mm
Hole d
1
mm
0015
0
74.80
MK 1
111
42
10
0025
1
94.10
MK 2
135
55
14
0030
2
105.00
MK 2
155
75
22
0035
2
105.00
MK 3
174
75
22
(138)
Piloted countersink holder, Morse taper shank
DIN
1835-B
HSS
MK 1–3
HSS
Piloted countersink
Not all items are available in every country.
133