1398 / 1562
9/6
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
9
Soldering/Welding/
Workshop Equipment
Explosion-proof torches
In potentially explosive areas appropriately
protected lamps must be used in order not
to trigger an explosion, for example, from the
spark when turning on the lamp.
Therefore the ATEX directives define the
following zones:
Zone 2:
Areas where only
rare and short
explosion danger exists.
Zone 1:
Areas, in which
occasionally
explosion danger exists.
Zone 0:
Areas, in which
continually or
frequently and over a long time
period
explosion danger exists.
On each light there should be a code, which
provides information about the application
area:
II
Group II devices must not be used
in mining.
1|2|3
Specifies the category, this
corresponds to the zone +1.
G|D
Suitable for gases/vapours (G) or
dust (D).
Ex
For use in potentially explosive areas.
ia|ib
Protection class intrinsic safety.
e
Ignition protection: increased safety.
IIx
Gas group (IIA = propane, IIB =
ethylene, IIC = acetylene/hydrogen).
IIIx
Dust group (IIIA = combustible
suspended matter, IIIB = no conductive
dust, IIIC = conductive dust).
Tx
Temperature class, specifies the
maximum allowable surface
temperature. (T6 = 85 °C, T5 = 100 °C,
T4 = 135 °C, T3 = 200 °C,
T2 = 300 °C, T1 = 450 °C)
Design:
Certified gas-, dust- and waterproof safety lamp made of highly resilient and
impact-resistant polycarbonate with clip, non-conductive. The rubberised rear switch for
single-hand operation is hermetically sealed against the penetration of water and dust. Optimal
illumination at close range and
distances up to 35 m.
There is also protection against short
circuit and incorrectly inserted batteries. ATEX Zone 1, certified, II 2G Ex ib IIB T4 Gb, working
temperature -20 °C to +40 °C . Supplied with 2 AAA/LR03 micro batteries.
Design:
Certified gas-, dust- and waterproof safety lamp made of highly resilient and
impact-resistant polycarbonate, non-conductive. The rubberised rear switch for single-hand
operation is hermetically sealed against the penetration of water and dust. Optimal illumination
at close range and
distances up to 150 m.
There is also protection against short circuit,
the batteries can be inserted regardless of their polarity.
ATEX Zone 1 certified, II 2G Ex ib
IIB T4 Gb, II 2D Ex ib IIIC T 105°C Db, working temperature -20 °C to +40 °C. Supplied with
4 Mignon batteries AA/LR06.
Note:
Compatible with popular headbands.
Design:
Waterproof safety lamp made of highly resilient and impact-resistant polycarbonate
with clip, non-conductive. The rubberised rear switch for single-hand operation is hermetically
sealed against the penetration of water and dust. Optimal illumination at close range and
distances up to 100 m.
There is also protection against short circuit and incorrectly inserted
batteries. ATEX Zone 2, conforms to II 3G Ex nA IIC T4. Supplied with 2 Mignon batteries
AA/LR06.
Design:
Certified gas-, dust- and waterproof safety lamp made of highly resilient and
impact-resistant XAG plastic, conductive at high impedance. Additional protection against
electrostatic discharge (ESD), electromagnetic interference (EMI) and radio frequency
interference (RFI). The rubberised rear switch for single-hand operation is hermetically sealed
against the penetration of water and dust. Optimal illumination at close range and
distances
up to 150 m.
There is also protection against short circuit,
the batteries can be inserted
regardless of their polarity.
ATEX Zone 0 certified, II 1G Ex ia IIC T4 Ga, II 2D Ex ib IIIC T
105°C Db, working temperature -20 °C to +40 °C . Supplied with 4 Mignon batteries AA/LR06.
Note:
Compatible with popular headbands.
Order
No.
Dimensions
mm
9054
Lighting duration
h
Luminosity
lm
Light bulbs
Weight
g
0201
143 x 19
23.90
ca. 10
30
LED
40
(596)
Order
No.
Dimensions
mm
9056
Lighting duration
h
Luminosity
lm
Light bulbs
Weight
g
0201
167 x 38
44.00
Min. 15 – max. 50
120
LED
170
(596)
Order
No.
Dimensions
mm
9059
Lighting duration
h
Luminosity
lm
Light bulbs
Weight
g
0051
154 x 24
24.90
Min. 12 – max. 50
60
LED
80
(596)
Order
No.
Dimensions
mm
9059
Lighting duration
h
Luminosity
lm
Light bulbs
Weight
g
1000
167 x 38
57.60
Min. 15 – max. 50
120
LED
170
(596)
Torch PX2
Torch PX1
LED torch PX3
LED torch PX0
IP 68
IP 68
IP 68
IP 68
m
Torches
1398