142 / 1562
1/122
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
1
Cutting Tools
Design:
Set consisting of:
1 robust, ergonomically shaped softgrip handle EL SG 3000 GT
with comfortable finger hollow and blade magazine
(order no. 6719 0020)
1 HSS-Plus blade B 10 S
(order no. 6719 0210)
1 HSS-Plus blade E 100S
(order no. 6719 0250)
Application:
Due to the twin mount, all B-blades with a ∅ 2.6 mm and
all E-blades with a ∅ 3.2 mm shank can be used.
Note:
The Plus-blades are distinguished by a long tool life and
suitability for stainless steels.
Softgrip deburrer set SG 1000
for Ø 2,6 mm Shaft
for Ø 3,2 mm Shaft
Design:
Set consisting of:
1 robust, ergonomically shaped softgrip handle EL SG 3000 GT
with comfortable finger hollow and blade magazine
(order no. 6719 0020)
1 HSS crank countersink head BC 1650 ∅ 3.2 mm, outer ∅ 16.5 mm
(order no. 6719 0500)
Application:
Due to the twin mount, all B-blades with a ∅ 2.6 mm and
all E-blades with a ∅ 3.2 mm shank can be used. By connecting with
the countersunk head, faster countersinking and chamfering with less
fatigue is enabled for drill holes up to ∅ 16.5 mm.
Softgrip deburring countersinks set SG 1500
for Ø 2,6 mm Shaft
for Ø 3,2 mm Shaft
Design:
Set consisting of:
1 robust, ergonomically shaped softgrip handle EL SG 3000 GT
with comfortable finger hollow and blade magazine
(order no. 6719 0020)
1 HSS crank countersink bell EX 2000 ∅ 3.2 mm, outer ∅ 4–18 mm
(order no. 6719 0510)
Application:
Due to the twin mount, all B-blades with a ∅ 2.6 mm and
all E-blades with a ∅ 3.2 mm shank can be used. Deburring and cham-
fering of round material up to ∅ 18 mm are enabled by connecting with
the deburring bell.
Softgrip chamfering tool set SG 1100
for Ø 2,6 mm Shaft
for Ø 3,2 mm Shaft
Design:
Set consisting of:
1 robust, ergonomically shaped softgrip handle EL SG 3000 GT
with comfortable finger hollow and blade magazine
(order no. 6719 0020)
1 HSS crank piercing deburrer BO 1000 ∅ 3.2 mm
(order no. 6719 0300)
Application:
Due to the twin mount, all B-blades with a ∅ 2.6 mm
and all E-blades with a ∅ 3.2 mm shank can be used. Inner piercings
and slots for o-rings as well as securing rings can easily be deburred
by connecting with the crank piercing deburrer.
Softgrip piercing deburrer set SG 1200
for Ø 2,6 mm Shaft
for Ø 3,2 mm Shaft
Order
No.
6708
0010
15.75
(554)
Order
No.
6709
0010
32.10
(554)
Order
No.
6710
0010
26.20
(554)
Order
No.
6711
0010
21.30
(554)
Deburring tools
142