1430 / 1562
9/38
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
9
Soldering/Welding/
Workshop Equipment
Design:
The hydraulic head adjustable by
360° is made of aluminium and is equipped
with a wear-resistant cylindrical surface. The
pneumatic cylinder is made of die-cast alu-
minium with smooth-running, wear-resistant
and hard-chromed piston made of hardened
steel. The wear-resistant compact seal has
a large wiping action and a long service life.
With quick-action ventilating valve for high
working results. Favourable centre of gravity
for fatigue-free operation, low noise pneumat-
ic circuit. With mandrel-collection container
and a user-friendly handle.
Application:
For all materials from ∅ 3 to 5
mm, and for blind rivets ∅ 2.4 mm with small
feed unit. Not suitable for CAP-blind rivets
made of stainless steel.
Nosepieceattachment:
Rivet ∅ rivet materials
nosepiece
2.4
Alu
10/18
3.2
CAP-Alu, Cap-Cu
10/18
3 and 3.2 Alu, Cu, steel, stainless 10/24
steel, Stinox, Alu/Alu,
PG-Alu, PG-steel
4
Alu, Cu, CAP-Alu,
16/24
CAP-Cu
4
steel, Alu/Alu, PG-Alu 16/27
4
stainless steel, Stinox, 16/29
PG-steel
5 and 4.8 Alu, CAP-Alu,
16/29
CAP-Cu, PG-Alu
4.8 and 5 steel, Alu/Alu
16/32
4.8 and 5 stainless steel,
16/36
Stinox, PG-steel
Scope of delivery:
Blind rivet pistol PH 2,
5 nosepieces16/24, 16/27, 16/29, 16/32,
16/36, 1 set of jaws, 1 collecting basin,
1 assembly key.
Order
No.
Equipment lift
mm
9315
Air consumption per rivet
l
Setting force
N
Weight
g
0005
15
536.00
1.2–1.8
7375
1300
(963)
Blind rivet gun PH 2 pneumatic-hydraulic
Design:
With integrated protection device
against mandrels flying out. The receptacles
for the alternate mouthpieces are located in
the bottom of the device. The compressed
air used for the setting process is also used
to suck up the rest of the mandrel. The new
gripper jaw system increases the service life
many times over. The trailing port prevents
being affected by the hose. The rivet suction
can only be switched on by lifting the machi-
ne. Retractable suspension bracket on the
head. Coordinated device lift for quick work
sequences with removable mandrel-collecting
container.
Nosepieceattachment:
rivet-∅ rivet material
nosepiece
2.4
Alu
17/18
3.2
CAP-Alu, Cap-Cu
17/18
3
Alu/Cu
17/20
3 and 3.2 Alu, Cu, steel, stainless 17/24
steel, Stinox, Alu/Alu,
PG-Alu, PG-steel
4
Alu, Cu, CAP-Alu,
17/24
CAP-Cu
4
steel, Alu/Alu, PG-Alu 17/27
4
stainless steel,
Stinox, PG-steel
17/29
4.8 and 5 Alu, CAP-Alu,
17/29
CAP-Cu, PG-Alu
4.8 and 5 steel, Alu/Alu
17/32
4.8 and 5 stainless steel,
17/36
Stinox, PG-steel
6
Alu
17/36
6
steel
17/40
6.4
Alu
17/40
6.4
steel, Alu/Alu
17/45
8
Alu
17/45
Scope of delivery
:
Blind rivet pistol,
assembly key SW 12/14, 14/17,
1 bottle hydraulic oil 100 ml,
1 oil refill container.
Order
No.
Equipment lift
mm
9316
9317
Air consumption per rivet
l
Setting force
N
Weight
g
0005
18
716.00
–
2.3
9000 1600
0005
25
–
947.00
4.8
14000 1900
(963)
(963)
Blind rivet gun TAURUS
®
series pneumatic-hydraulic
9316
TAURUS
®
2
For all materials up to ∅ 5 mm and aluminium/steel up to ∅ 6 mm
(max. mandrel ∅ 3.2 mm).
Supplied with 4 nosepieces17/27, 17/29, 17/32, 17/36.
9317
TAURUS
®
3
For all materials up to ∅ 6.4 mm (maximum mandrel ∅ 4.5 mm).
Supplied with 3 nosepieces17/36, 17/40, 17/45.
Blind rivet guns
1430