1498 / 1562
9/106
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
9
Soldering/Welding/
Workshop Equipment
Order
No.
Design
9911
PU
0025
125 g tube
on request
12
0010
250 g can
on request
12
0015
500 g can
on request
12
0020
1 kg can
on request
6
Design:
PVC glue on tetrahydrofuran basis, stabilised. Meets the requirements of DIN 16970,
KRV Directive R 1.1.7 and the construction and testing of drainage systems. VBF: Al.
Application:
Suitable for longitudinal force joining of pressure pipes (e.g. water and gas pipes)
with solvent cement socket or fittings made of PVC-U to the recommendations of the Plastic
Pipe Association for bonding cable sewer pipes, gutters etc. made of PVC-U.
Note:
This product is subject to the prohibition of self service from the Chemical Prohibiton
Regulation (ChemVerbotsV).
Special adhesive Tangit PVC-U
Order
No.
Design
9911
PU
0005
1 l bottle
16.15
8
(984)
Design:
Cleaner based on ethyl alcohol.
Application:
For intensive cleaning, degreasing and preparation of plastic welds.
Preferably for PE, PP, PB, PVDF plastics.
Special cleaner Tangit PE/PP/PB/PVDF
Order
No.
Design
9911
PU
0035
125 ml bottle
on request
20
0030
1 l bottle
on request
12
Design:
Cleaner based on acetone/tetrahydrofuran, stabilised. VBF: B.
Application:
For cleaning PVC-U and PVC-C-adhesive surfaces for subsequent bonding.
Cleaner Tangit PVC-U/C ABS
Design:
Two-component adhesive based on epoxy resin, solvent-free. The adhesive bond
is impact-resistant, aging and moisture resistant. The processing time is up to 90 minutes,
curing time and final strength (up to 30 N/cm
2
) are temperature dependent.
Application:
For metal, glass, porcelain, wood, marble, stone, concrete, thermosetting plastic,
glass fibre reinforced plastic, rigid PVC, rubber, etc.
Note:
Not suitable for polyethylene, polypropylene, polytetrafluoroethylene, polystyrene, soft
PVC and adhesions on large glass surfaces.
This product is subject to the prohibition of self service from the Chemical Prohibition
Regulation (ChemVerbotsV).
Order
No.
Design
9913
PU
0005
33 g tubes (binder and hardener)
on request
6
0010
163 g tubes (binder and hardener)
on request
1
0035
Binder 915 g can
on request
3
0040
Hardener 740 g can
on request
3
Reaction adhesive UHU PLUS ENDFEST 300
Design:
Two-component adhesive based on epoxy resin, solvent-free. The adhesive bond cures
transparent, impact-resistant, non-aging and moisture resistant. The processing time is up to
2 minutes, firmness to touch is achieved after 5 minutes, ultimate strength is 8 N/cm
2
.
Application:
Particularly suitable for fast bonding in small areas. For metal, glass, porcelain,
wood, marble, stone, concrete, thermosetting plastic, glass fibre reinforced plastic, rigid PVC,
rubber, etc.
Note:
Not suitable for polyethylene, polypropylene, polytetrafluoroethylene, polystyrene and
soft PVC and adhesions on large glass surfaces.
Order
No.
Design
9913
PU
0045
35 g tubes (binder and hardener)
on request
6
Reaction adhesive UHU PLUS SOFORTFEST
9913
0005–0010
9913 0035
9913 0040
Adhesives
1498