388 / 1562
2/142
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
2
Cutting Tools
Saw blade quality:
Bimetal:
Highly flexible, almost non-breakable combination of HCS
and HSS, long service life. Can be used for hard woods, abrasive
wooden materials, hard plastic, non-ferrous metals and metals.
Tooth design:
Teeth milled, side clearance side set:
Blade with relatively coarse cut
and fast work progress in hard and soft wood, aluminium, plastics and
non-ferrous metals.
Tooth pitch:
Small tooth pitch for fine cuts with slower work progress, in hard and/
or thin material such as metals and non-ferrous metals.
Large tooth pitch for coarser cuts coupled with fast work progress in
soft and/or thick material such as wood and plastic.
Application:
Saw blades are subject to high mechanical and
thermal loads. For this reason, the use of spe-
cific coolants, e.g. cutting oil (for steel, metals)
or water (for aluminium, INOX, thin sheets), is
recommended in order to extend the wear-
resistance of the saw blade.
Design: 5 pieces in PVC pouch, (exception: 2748, 25 pieces.)
Suitable for:
All sabre, reciprocal and tiger saws with standard shank.
Sabre saw blades for wood and metal
* 25 pieces.
2744 0050
For pallet repairs, wood with nails/metal, metal
sheets, pipes, aluminium profiles. For wood
with nails/metal.
2746 0052
For wood with nails/metal, chipboard, porous
concrete, plastic/GRP, profiles.
2748 0055
For pallet repairs, wood with nails/metal, metal
sheets, pipes, aluminium profiles.
2746/48 0060
For wood with nails/metal, chipboard, metal
sheets, pipes, aluminium profiles, plastics/
GRP, solid window frames: wood plus metal,
specially designed for plunge cuts.
2746 0066
For wood with nails/metal, chipboard, metal
sheets, aluminium, plastic/GRP, profiles.
2746/48 0075
For wood with nails/metal, metal sheets, pipes,
aluminium profiles, plastic profiles.
2746 0240
For wood with nails/metal (< 250 mm), metal
sheets, aluminium profiles (3–10 mm), GRP/
epoxy (∅ < 250 mm), flexible flush cut.
Order
No.
Bosch No.
2744 2746
2748
Total
length
mm
Material Wood
with
nails/
metal
mm
Pallets
mm
Wood,
chip-
board
mm
Sheet
metal,
pipes,
profiles
mm
Plastics:
pipes,
profiles
mm
Plastics,
epoxy
mm
Tooth
pitch
mm
Type of
tooth
0035
S 922 EF
–
–
61.30
*
m
150 Bimetal < 100 – –
–
– – 1.4/18 side set;
milled
0050
S 922 HF
11.80
–
–
150 Bimetal < 100 < 100 – 3–12 – – 2.5 side set;
milled
0052
S 1411 DF
–
22.70
–
300 Bimetal < 250 – < 250 – < 250 < 60 4.3/6 side set;
milled
0055
S 1122 HF
–
–
93.80
*
225 Bimetal < 175 < 175 – 3–12 – – 2.5/10 side set;
milled
0056
S 1222 VF
19.65
–
–
300 Bimetal < 250 – – 3–10 – < 250 1.8–2.6 side set;
milled
0060
S 611 DF
–
–
67.00
*
150 Bimetal < 100 – < 100 – < 100 < 50 4.3/6 side set;
milled
0060
S 611 DF
–
14.85
–
150 Bimetal < 100 – < 100 – < 100 < 50 4.3 side set;
milled
0066
S 3456 XF
–
22.00
–
200 Bimetal < 150 – < 150 3–18 < 150 < 150 2.1–
4.3/6–12
side set;
milled
0075
S 922 VF
–
13.60
–
150 Bimetal < 100 – – 3–10 – < 100 1.8–2.6/
10-14
side set;
milled
0075
S 922 VF
–
–
61.30
*
150 Bimetal < 100 – – 3–10 – < 100 1.8–2.6 side set;
milled
0080
S 1122 VF
18.15
21.00 93.80
*
225 Bimetal < 175 – – 3–10 – < 175 1.8–2.6 side set;
milled
0240
S 1222 VF
–
22.70
–
300 Bimetal < 250 – – 3–10 – < 250 1.8–2.6/
10–14
side set;
milled
(248)
(247)
(247)
2744/46/48 0080
For wood with nails/metal, metal sheets,
pipes, aluminium profiles, flexible flush cut.
For wood with nails/metal. Plastic profiles
(dia. 3–175 mm).
2744 0056
For wood with nails/metal. Plastic profiles
(dia. 3–250 mm).
Sabre saw blade
388