766 / 1562
4/38
Inside micrometers/inside measuring devices
DIN
863
Design:
Universal measuring instrument with integrated dial indicator
with 0.01 mm scale division and fine adjustment for the display, with
carbide-tipped measuring inserts, display range 0.2 mm, measuring
force 3.5 N. Supplied in plastic case.
Application:
For 2 or 3 point measurements, depending on the
accessories used. Suitable for through-hole and blind hole bores,
grooves and recesses as well as inside measurement on workpieces
with plane parallel surfaces.
Order
No.
Measurement range
mm
4149
Set contents
1001
10–150
2270.00
1 bore gauge INTERAPID IRA 2 md
3 carbide-tipped measuring inserts
3 short measuring inserts, hardened steel
3 long measuring inserts, hardened steel
2 adjustable measuring inserts, for bore hole > 6 mm
1 small measuring insert holder, for 3 point contact
1 large measuring insert holder, for 3 point contact
1 centring bridge, for bore holes from 15–30 mm
1 centring bridge, for bore holes from 30–150 mm
1 special screwdriver
(495)
Design:
Highly precise, robust and easily operated measuring
instrument. Measurement with 2-point contact on the test object.
Measuring anvil longitudinally movable, ball guided and under spring
force. Measuring bolts and extensions carbide tipped. By mounting the
extensions with built-in gauge measuring element, any dimension can
be measured within the field of application. Display of turning point by
means of integrated lever gauge, always consistent measuring force.
Stable measurements due to small device deflection and good thermal
insulation of the extensions. Graduation value of the dial gauge and
micrometer screw: 0.01 mm, measuring range of the micrometer
screw: 25 mm, reading accuracy of the dial gauge: ± 0.4 mm,
measuring force: 15–20 N. Measuring element and setting gauge
with identification number. Supplied in a wooden box.
Application:
Multi-use instrument for measuring particularly large
inside and outside measurements. Measuring in horizontal and vertical
positions.
Note:
Special accessories available on request.
Order
No.
Measurement range
4146
Set contents
0010
Internal dimensions: 250–1475 mm
External dimensions:
225–1450 mm
21770.00
◊
1 measuring element, internal dimensions 250–275 mm/external dimensions 225–250 mm
1 measuring bolt pair for inside measurements, 34 mm
1 measuring bolt pair for inside and outside measurements, 75 mm
1 measuring bolt pair for outside measurements, 100 mm
1 setting gauge, internal dimension 250 mm/external dimension 225 mm
1 extension, 25 mm (error limit 0.7 µm)
1 extension, 50 mm (error limit 1.0 µm)
1 extension, 75 mm (error limit 1.2 µm)
1 extension, 100 mm (error limit 1.5 µm)
1 extension, 125 mm (error limit 1.5 µm)
1 extension, 150 mm (error limit 2.0 µm)
1 extension, 300 mm (error limit 3.5 µm)
1 extension, 450 mm (error limit 4.5 µm)
1 extension, 600 mm (error limit 6.5 µm)
1 special screwdriver
1 support accessories set (4 bracket pieces and 4 clamping pieces)
(497)
Inside micrometer set UNIMASTER
Inside measuring device INTERAPID IRA 2 md
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
4
Measuring
Equipment
766