814 / 1562
4/86
Angle
Design:
Angle acc. to
DIN 875/00,
hardened and made of rustproof steel. Straightedge acc.
DIN 874/00,
normal steel, burnished glare-free. Supplied in a wooden box.
Application:
For control purposes in tool construction and production.
Order
No.
Design
4627
Set contents
0050
5-piece
170.50
1 straightedge square, size 75 x 50 mm (Order No. 4621 0750)
1 die maker's square with inside measuring edge,
size 25 x 20 mm (Order No. 4625 0250)
1 die maker's square with inside measuring edge,
size 40 x 28 mm (Order No. 4625 0400)
1 straightedge, length 100 mm (Order No. 4761 0100)
1 gauge block scribing tip, 60 x 9 x 9 mm
(410)
Precision test set, stainless
DIN
874/00
DIN
875/00
INOX
Design:
Made of special steel, with mm graduation on the rail, upright edges and flat sides
ground.
Application:
For centring and marking off the centre point on round discs and shafts.
Order
No.
Dimensions
mm
4631
For shafts up to ∅
mm
Angle tolerance
mm
0100
100 x 70
35.40
90
0.027
0150
150 x 130
41.60
190
0.031
0200
200 x 150
52.50
220
0.035
0250
250 x 160
74.50
230
0.037
0300
300 x 180
87.20
280
0.040
(454)
Precision centre square
Design:
Made of special steel, upright edges and flat sides ground.
Application:
For marking and inspecting of 120°.
Order
No.
Stock length
mm
4633
Cross-section
mm
0050
50 x 50
12.20
15 x 5
0075
75 x 75
15.45
18 x 5
0100
100 x 100
18.75
20 x 5
(454)
Steel square 120°
Design:
Made of special steel, precision finished, with equal width arms, test surfaces and flat
sides ground.
Application:
For accurate marking off and testing of 45° for 90° corner joints.
Order
No.
Stock length
mm
4634
Cross-section
mm
Angle tolerance
mm
0120
120 x 80
21.00
20 x 5
0.032
0150
150 x 100
23.40
20 x 5
0.035
0200
200 x 130
31.20
25 x 5
0.040
(454)
Mitre square 135° with base
Factory
standard
Factory
standard
Factory
standard
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
4
Measuring
Equipment
814