943 / 1562
5/73
Articles marked ◊ are not held in stock, procurement is effected at short notice.
5
Hand Tools
Design:
Tested and approved according to
DIN 57680/6 and VDE 0680/6.
Blades made of
tool steel, insulated. The display system (LED) is integrated into the clear ABS plastic handle.
With metal clip.
Order
No.
Voltage range
V
5563
Total length
mm
0006
150–250
5.75
150
(543)
Voltage testers, single-pole
Design:
Tested and approved according to
EN 61010-1 and IEC 61326. Voltage range
selectable,
single pole,
alternating current.
Made of plastic with red illuminating probe
all around, audible alarm and insulated plastic clip. With visual low battery warning and
automatic shutdown. Supplied with 2 AAA/LR03 micro batteries.
Application:
For the location of cable breaks, defect fuses in plugs and fixtures, as well as
faulty switches or bulbs connected in series. Also suitable for use in airborne networks up to
400 Hz.
Order
No.
Voltage range
V
5569
Total length
mm
1155
12–1000/220–1000
15.35
155
(513)
Voltage tester, inductive
Design:
Made of plastic with red illuminating probe all around, audible alarm and insulated
plastic clip. With visual low battery warning and automatic shutdown. Supplied with 2 micro
batteries AAA/LR03.
Application:
For the testing of magnetic valves in pneumatic and hydraulic systems, as well
as in the servicing of oil burners. In addition, suitable for testing electrically controlled solenoid
valves in vehicles or machinery of any kind.
Order
No.
Total length
mm
5569
2155
155
20.60
(513)
Magnetic field tester, inductive
Design:
For
6–24 V, bipolar.
Made of brass, with steel probe, solid cable
and terminal.
Order
No.
Total length
mm
5565
0005
120
3.70
(514)
Automobile light tester
IP 65
CAT
IV
IP 65
CAT
IV
Design: Alternating current.
Made of shatter-resistant ABS plastic with illuminating probe
all around, depending on the test result green or red as well as acoustic signal generator and
insulated plastic clip. With automatic shutdown after 5 minutes. Supplied with 2 AAA/LR03
micro batteries.
Application:
For locating cable breaks, testing for phase balance and the phase as well as
phase sequence test in three-phase systems.
Order
No.
Voltage range
V
5568
Total length
mm
0150
200–1000
39.90
153
(514)
Voltage and phase sequence testing, without contact
IP 65 CAT
IV
Design:
For
24–1000 V, CAT III 1000 V, single-pole,
alternating current. Impact-resistant
casing with test probe that lights up red, integrated torch and plastic clip. Supplied with
2 AAA/LR03 micro batteries.
Application:
For the localising of electrical voltages in cables, plugs, bulb sockets and fuses,
as well as for the finding of circuit breakers in wires and cables.
Order
No.
Total length
mm
5525
0005
158
10.80
(465)
Voltage tester, inductive
CAT
III
m
m
m
Voltage testers/valve testers/automobile light testers
Not all items are available in every country.
943