115 / 1562
1/95
Articles marked ◊ are not held in stock, procurement is effected at short notice.
1
Cutting Tools
Design:
HSS.
Short model. Milling blades with chip breakers.
Application:
Suitable for drilling and milling thin-walled materials.
Order No.
Steels
up to
850
N/mm
2
Steels
up to
1000
N/mm
2
Steels
up to
1400
N/mm
2
Steels
up to
42 HRC
Steels
up to
52 HRC
Steels
up to
56 HRC
Steels
up to
60 HRC
Hard
machining
over
60 HRC
Stainless
and acid-
resistant
steels (INOX)
Ti steels,
Ti alloys,
special
steels
Cast iron
materials
Al,
AI and
Mg alloys
Copper,
brass,
bronze
1323
C
C
V
V
U
Order
No.
∅
mm
1323
Total length
mm
Shank ∅
mm
0600
6
5.20
90
6
(124)
Universal milling drill cyl. Shank
HSS
118°
Information on articles for cable screw-connections
The threads are metric ISO precision thread, each with
a gradient of 1.5 for all sizes.
In distribution cabinets with wall thicknesses up to max.
3–5.5 mm, cable screw connections are screwed into
the body. The thread core hole is drilled with one of our
stepped drills for cable screw connections.
Special cutting tap bits (M12-M32) have been developed for
the corresponding thread. The cutting taps have a long pilot
tip, which is used to fix the tool in the hole in order to create
a 100 % aligned thread, even with single-sided pressure.
The tap drive is designed so that it can be operated with
a standard hexagon insert ("nut") and a ratchet using just
one hand. This type of drive saves time and space.
Design:
Short design with hexagon drive for working with one hand, including in difficult to
access areas. Guide pins for thread core holes for perfect, aligned threads.
Drive with nut and ratchet.
For metric ISO precision thread DIN 13.
Application:
Specially for processing distribution boxes with wall thicknesses of 3.0 mm to
max. 5.5 mm.
Order
No.
Thread
1311
Gradient
mm
Total length
mm
Cutting length
mm
Thread ∅
mm
Width of keys
1512
M12 x 1.5
15.50
1.5
51
16.5
10.5
SW 8
1516
M16 x 1.5
25.60
1.5
51
16.5
14.5
SW 10
1520
M20 x 1.5
35.00
1.5
51
16.5
18.5
SW 13
1525
M25 x 1.5
46.70
1.5
51
16.5
23.5
SW 13
1532
M32 x 1.5
77.70
1.5
51
16.5
30.5
SW 13
(162)
Special cutting tap bit for cable screw connections
MF HSS ISO 2
6H
Design:
Supplied in a robust plastic case with foam inlays for safe tool storage.
Electrical assortment
Design:
HSS, TiN coated surface
Milling stepped drill with cross point. Chuck slippage is avoided by the 3-surface shank.
With laser print of hole ∅ and speed.
Application:
For burr-free drilling and reaming of sheets, pipes and profiles as well as
for milling long holes and contours.
Order No.
Steels
up to
850
N/mm
2
Steels
up to
1000
N/mm
2
Steels
up to
1400
N/mm
2
Steels
up to
42 HRC
Steels
up to
52 HRC
Steels
up to
56 HRC
Steels
up to
60 HRC
Hard
machining
over
60 HRC
Stainless
and acid-
resistant
steels (INOX)
Ti steels,
Ti alloys,
special
steels
Cast iron
materials
Al,
AI and
Mg alloys
Copper,
brass,
bronze
1323
C
C
V
C
Order
No.
Drill steps ∅
mm
1323
TiN
Step length
mm
Total length
mm
Shank ∅
mm
0412
4–12
25.90
10
80
6
(124)
Milling stepped drill
HSS
TiN
Order
No.
Set contents
1311
1000
Special cutting tap bits
M12 x 1.5; 16 x 1.5; 20 x 1.5; 25 x 1.5; 32 x 1.5
Stepped drill with spiral slots EC 10 for
∅ 7–32.5/M12 x 1.5/M32 x 1.5
199.00
(162)
Drilling tools
Not all items are available in every country.
115