1242 / 1562
7/18
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
7
Hand Tools
Order
No.
Set content ∅
mm
7121
Number of
hole punches
Piece
Increasing
mm
0010
2–20
95.90
19
1
0020
2–30
116.00
15
2
(572)
Wad punch set
Design:
Made of high-strength special steel, smoothed and polished
hollow punch inserts. For cutting soft materials (rubber, leather, felt,
foam...). Reinforced materials (metal sheet, glass fibre) up to 0.3 mm
can also be punched. In sturdy metal case.
Order
No.
Design
7126
Set contents
0020
11-piece
66.90
Punch from 3 to 20 mm:
Thread inserts 3; 4; 6; 8; 10 mm
Stick-on inserts 12; 14; 16; 18; 20 mm
Holders
0030
16-piece
102.50
Punch from 3 to 30 mm:
Thread inserts 3; 4; 6; 8; 10 mm
Stick-on inserts 12; 14; 16; 18; 20; 22;
24; 26; 28; 30 mm
Holders
0040
21-piece
166.50
Punch from 3 to 40 mm:
Thread inserts 3; 4; 6; 8; 10 mm
Stick-on inserts 12; 14; 16; 18; 20; 22;
24; 26; 28; 30, 32; 34; 36; 38; 40 mm
Block holders
0050
26-piece
219.00
Punch from 3 to 50 mm:
Thread inserts 3; 4; 6; 8; 10 mm
Stick-on inserts 12; 14; 16; 18; 20; 22;
24; 26; 28; 30, 32; 34; 36; 38; 40; 42;
44; 46; 48; 50 mm
Block holders
0060
33-piece
386.00
Punch from 3 to 60 mm:
Thread inserts 3; 4; 6; 8; 10 mm
Stick-on inserts 12; 14; 16; 18; 20; 22;
24; 26; 28; 30; 32; 34; 36; 38; 40; 42;
44; 46; 48; 50; 52; 54; 56; 58; 60 mm
Block holders 11 to 60 mm
holder 3 to 30 mm
circle cutter 500 mm
(518)
Hole punch set
7126 0020
7126 0030
7126 0040
7126 0050
7126 0060
Design:
With replaceable, tempered punch
with pressed-on ejector spring. The depth
stop can be adjusted in the 35 to 105 mm
range.
Application:
For quick and easy punching of
trapezoidal metal sheet up to 1.2 mm thick.
Order
No.
Length
mm
7111
Hole ∅
mm
Cutting width
mm
0700
700
291.00
10
10–100
(508)
Trapezoidal sheet punch plier
Design:
DIN 7200 A, made of special tool steel, drop-forged, with
finely polished tip and powder-coated shaft. Hardened and tempered
cutting edge, slightly conical interior for simple removal of cut-out.
Supplied in roll-up case.
Application:
For the creation of seals and sealing rings made of
cardboard, leather, rubber, etc.
Hole punch set/punch pliers
1242