Table of Contents Table of Contents
Previous Page  1266 / 1562 Next Page
Information
Show Menu
Previous Page 1266 / 1562 Next Page
Page Background

7/42

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).

7

Hand Tools

Design:

With low-wearing, torsion-resistant piston made of brass. Dual-valve system with

stainless steel balls. Ergonomic operating lever, locked to be used as a handle.

Application:

For precise and quick pressure and leakage testing of pipeline systems in

sanitary, heating and sprinkler installations, for compressed air, steam and cooling systems,

oil installations in boiler and pressurised vessel construction.

Order

No.

Control and pressure range

7134

Container volume

l

Connection

inch

Performance

kW

0005

0–6 MPa/0–60 bar/0–870 psi

144.00

12

1/2

1.75

0015

0–6 MPa/0–60 bar/0–870 psi

237.00

12

1/2

1.75

(001)

Testing pump, manual

7134 0005

7134 0015

7134

Container made of corrosion-resistant sheet steel, powder-coated.

0005

7134

Container made of stainless steel.

0015

m

INOX

Design:

Self-priming electric testing pump with high-performance piston pump with low-

wearing pressure piston made of stainless steel for high capacity and long service life. Intake

hose with filter to suction from containers or to connect a tube valve. Muted, glycerine-filled

pressure gauge and high-pressure hose with fabric insert to reduce measurement errors.

Application:

Pressure and leakage testing (in accordance with DIN 1988) with water, water

solutions and emulsions. For liquids with a pH value 7–12, temperature –30 °C to 60 °C and

viscosity ≤ 1.5 mPa. For the simple and quick testing of pipe systems, also suitable for large

systems.

Order

No.

Control and

pressure range

7134

Suction volume

l/min

Connection

inch

Performance

kW

0050

6 MPa/60 bar/870 psi

on request

7

1/2

1.75

Testing pump, electric

Design:

With connector piece and shut-off valve. Suitable for manual and electric testing

pumps (Order No. 7134 0005–0050).

Application:

For pressure checks, including after removal of testing pump. For several test

bodies and anti-theft protection.

Order

No.

Control and pressure range

7134

0105

6 MPa/60 bar/870 psi

on request

Manometer for testing pump

Design:

Measuring device is mounted in a sturdy unit. Self-testing pressure pump, with check

valve and pressure gauge (∅ 60 mm), 0–4 bar, detailed scaling, accuracy 0.1 bar increments.

Application:

For leakage testing of gas lines and devices with operating pressures of up to 150 mbar.

Tightness test for drinking water house installations in line with DIN 1988 (TRWI) of 3 bar/150 bar.

Load test in line with DVGW-TRGI 96 7.1.2 with test pressure of 1.0 bar.

Tightness test for water column in line with DVGW-TRI 96 7.1.3 with test pressure of 150 mbar.

Setting of atmopsheric burners and forced-air burner from 0–30 mbar.

Liquid gas test (lower pressure) with test pressure of 40–60 mbar in acc. with TRF 96 9.4.

Liquid gas test for propane/butane with test pressure of 150 mbar in acc. with TRF 96 9.4.

Supplied:

4-bar pressure pump, pressure container, rubber blow, test hose, 4 connector tubes,

5 gas test plugs size 0–2 conical and 1–2 cylindrical as well as a supply end cap.

Order

No.

7273

0006

570.00

(591)

Gas line tester ROTEST

®

GW 150/4

m

Testing pumps/gas pipe testing devices

1266